Search
You can find the results of your search below.
Fulltext results:
- k80 @tips
- /opt/cuda-samples cd /opt/cuda-samples cd Samples/deviceQuery/ make </code> deviceQuery <code="bash"> cd /opt/cuda-samples/bin/x86_64/linux/release ./deviceQuery ./deviceQuery Starting... CUDA Device Query (Runtime API) version (CUDART static linking) Detect
- lxd @tips
- ol/lxd # define default storage pool lxc profile device add default root disk path=/ pool=zfspool # init... nel_modules: openvswitch,nbd,ip_tables,ip6_tables devices: eth0: mtu: "9000" name: eth0 nict... twork attach lxdbr0 $istance eth0 eth0 lxc config device set $istance eth0 ipv4.address 10.99.10.42 lxc st... onfig set $NAME environment.DISPLAY :0 lxc config device add $NAME X0 disk path=/tmp/.X11-unix/X0 source=/
- gnss @tips
- om/wiki/expansion/gw16143|ntrip client]] on ublox device pygnssutils Configure ublox as [[https://github... > systemctl stop gpsd systemctl stop gpsd.socket DEVICE=/dev/gps0 ubxtool -f $DEVICE -p RESET ubxtool -f $DEVICE -e NMEA ubxtool -f $DEVICE -d BINARY ubxtool -f $DEVICE -p SAVE </code> ntri
- smartreader @tips
- g [ 140.880499] usb 2-1.4.3: new full-speed USB device number 4 using xhci_hcd [ 140.953936] usb 2-1.4.3: device descriptor read/64, error -32 [ 141.133931] usb 2-1.4.3: device descriptor read/64, error -32 [ 141.313810] usb 2-1.4.3: new full-speed USB device number 5 using xhci_hcd [ 141.409163] usb 2-1.4.
- googlehome @projects:internetofthings
- d you the screen where you can set rooms for your devices or nicknames for your devices. * If you want to allow other household users to control the devices: - GO to the settings for the project you cr... g that should lead you the screen where you can set rooms for your devices or nicknames for your devices.
- gstreamer @tips
- e> show usb camera <code> gst-launch-1.0 v4l2src device=/dev/video0 ! xvimagesink </code> rtsp client <c... -U|oCam-1CGN-U]] identify <code> v4l2-ctl --list-devices v4l2-ctl --list-formats-ext -d /dev/video0 ... 00k tbc </code> <code> gst-launch-1.0 -v v4l2src device=/dev/video0 ! 'video/x-bayer,format=grbg,width=64... with h264 encode <code> gst-launch-1.0 -e v4l2src device=/dev/video0 ! 'video/x-bayer,format=grbg,width=12
- tradfri @projects:internetofthings
- >> api(gateway.factory_reset())</code> Lista dei device collegati: <code> >>> api(gateway.get_devices())</code> Versione del firmware di un dispositivo: <code> >>> devices[n].device_info.firmware_version </code> Versione del firmware del gateway: <code> >>> info = api(gatewa
- backup
- y the disk with <code> mplayer -v dvdnav:// -dvd-device /dev/sr0 2>&1 | grep TITLE </code> without a tit... ample) to vob file <code> mplayer dvdnav://1 -dvd-device /dev/sr0 -dumpstream -dumpfile movie.vob mplayer ... re </code> ===== tricks ===== Investigating the device mode pages with sdparm, I came up with the follow
- orin
- ecovery mode <code bash> lsusb | grep 955 Bus 001 Device 007: ID 0955:7323 NVIDIA Corp. APX </code> backu... l_flash/l4t_initrd_flash.sh --no-flash --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_externa... flash/l4t_initrd_flash.sh --flash-only --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_externa
- mdm @projects
- ===== mobile device management (MDM) ====== ==== gestione app ==== * https://gianomdm.comune.verona.it... ettuare l'enrollement del telefono, partire da un device resettato (android 7 o superiore). * Fare tap ... gnare i permessi che chiede * Inserire l'ID del device (che nella pagina del barcode presentata dal serv
- onvif @tips
- eAndTime IP=10.220.1.7 curl -s http://$IP/onvif/device_service \ -d '<s:Envelope xmlns:s="http://www.w3... hema"><'$QUERY' xmlns="http://www.onvif.org/ver10/device/wsdl"/></s:Body></s:Envelope>' \ | xmllint --for... <code> IP=10.220.1.7 curl -s http://$IP/onvif/device_service \
- zfs @tips
- reate file mydevice.xml <code> <disk type='block' device='disk'> <driver name='qemu' type='raw' cach... > </disk> </code> add volume <code> virsh attach-device --config juju-controller mydevice.xml </code> ==... nside /mnt zfs mount rpool/ROOT/ubuntu zfs set devices=off rpool mount --rbind /dev /mnt/dev mount --r
- broadlink @projects:internetofthings
- > broadlink </code> IR <code> ./broadlink_cli --device @broadlink --learn </code> RF <code> ./broadlink_cli --device @broadlink --rfscanlearn # convert result code ... lDCUMDSQNJCUMDSQNJA0lDSQlDA0AAXIAAAAA" </file> to reload deviced in haaska deactivate skill and enable.
- jetsonnano @projects:internetofthings
- code> cd /usr/local/cuda-10.0/samples/1_Utilities/deviceQuery sudo make ./deviceQuery cd /usr/local/cuda-10.0/samples/1_Utilities/bandwidthTest/ sudo make ./bandwidthTest </code> <code> Device 0: "NVIDIA Tegra X1" CUDA Driver Version / Runt
- zigbee @projects:iotaiuto
- indicating it has been reset. This also puts the device into pairing mode. ==== Remote control ==== Fac... indicating it has been reset. This also puts the device into pairing mode. ==== Lamp ==== Factory reset ... indicating it has been reset. This also puts the device into pairing mode. ===== LIDL ===== ==== Lamp