Search
You can find the results of your search below.
Fulltext results:
- 3dprinter
- _layer_0 = 80 retraction_combing = noskin support_enable = False support_type = buildplate </code> ===== ... ARD #define MOTHERBOARD BOARD_GT2560_V4_A20 // enable bltouch if present // comment PROBE_MANUALLY and ... decomment in Marlin/Configuration_adv.h <code> // Enable for M105 to include ADC values read from temperat... ation -> probe z-offest -> =**z-offest+deltaz** enable software endstops (M211 S1) store settings ===
- homeassistant @projects:internetofthings
- i" [Install] WantedBy=multi-user.target </file> enable service <code bash> systemctl daemon-reload systemctl enable hass </code> configuration example <code bash> ... i dpkg, riprovare dopo un reboot) sudo systemctl enable docker sudo systemctl start docker ls /dev/seria... nti con le frecce circolari **Sezione general** enable log scorrere in basso abilitare "disable MQTT g
- graphite @projects:internetofthings
- e bash> apt-get install graphite-carbon </code> enable boot startup in ///etc/default/graphite-carbon// enable ENABLE_LOGROTATION in ///etc/carbon/carbon.conf// extend retentions <file ini /etc/carbon/storage-schema
- influxdb @projects:internetofthings
- ces.list apt update apt install influxdb </code> enable admin service in /etc/influxdb/influxdb.conf and ... f.deb dpkg -i grafana_4.6.1_armhf.deb systemctl enable grafana-server systemctl start grafana-server </c
- iotaiuto @projects:internetofthings
- Homeassistant systemctl daemon-reload systemctl enable home-assistant </code> ==== CREAZIONE + INSTALLA... <code> systemctl start openvpn@client1 systemctl enable openvpn@client1 </code> **# il certificato da us
- doorbell @projects:iotaiuto
- p-citofono platform: ESP32 board: esp32dev # Enable logging logger: # Enable Home Assistant API api: wifi: ssid: "wifi ssid" password: "password" esp3
- led @projects:iotaiuto
- vice sudo systemctl daemon-reload sudo systemctl enable led.service sudo systemctl enable led-server.service # riavviare il sistema </code> Spiegazione dei fil
- turbolevo @projects:zibaldone:electronic
- * it was recommended to first turn bluetooth off, enable snooping (develop menu), enable bluetooth, do tests, disable bluetooth, disable snooping; exactly in this
- broadlink @projects:internetofthings
- lDCUMDSQNJCUMDSQNJA0lDSQlDA0AAXIAAAAA" </file> to reload deviced in haaska deactivate skill and enable.
- esphome @projects:internetofthings
- = BLE tracker smartband ===== ==== esphome ==== enable esp32_ble_tracker and a binary sensor on ble_pres
- googlehome @projects:internetofthings
- loud console. Here you get a new project_id. * Enable HOMEGRAPH API to the new project. {{:projects:i
- jetsonnano @projects:internetofthings
- O_SSL2 ./configure --prefix=/opt/python3.8 \ --enable-optimizations \ --with-lto make -j3 PROFILE_TAS
- micropython @projects:internetofthings
- 55.255.0', '192.168.2.1', '192.168.2.1') </code> enable webrepl <code> import webrepl_setup </code> rebo
- orangepizero2 @projects:internetofthings
- nge Pi Zero 2 ====== ===== I2C on armbian ===== enable i2c3 adding device tree definition: create dts fi
- smartband @projects:internetofthings
- Asleep. Next got to your **Gadgetbridge** App and enable under the decive settings the option "Send broadc