Galileo Labs

turbolevo

Anonymous (anonymous@undisclosed.example.com) — 2022-04-24T08:14:12+00:00

turbolevo canbus * canbus basic * exploring canbus * canbus esp32 project * tutorial * transreceiver SN65HVD230 datasheet example ESP32 project * transreveiver TJA1050T: datasheet * firmware * * BMS Same port charge and discharge balance PCM for 36V * B-: Connect to the negative pole of the battery pack * P-: No Connect * C-: Connect to the negative electrode of charge and discharge

alhambra

Anonymous (anonymous@undisclosed.example.com) — 2015-06-10T06:29:49+00:00

Recuerdos de l'alhambra - Tarrega part 1: 0 4 1 3 3 2 <--fingering E||--------------------------------------------------| B||----5-5-5---5-5-5---5-5-5---5-5-5---3-3-3---3-3-3-| G||------------------5---------------4---------------| D||----------2---------------2---------------2-------| A||--0-----------------------------------------------| E||--------------------------------------------------| 1 2 3 3 -----…

lxd

Anonymous (anonymous@undisclosed.example.com) — 2019-11-19T18:12:12+00:00

LXD lxd install apt remove lxd lxd-client snap install lxd # create zfs dataset on pool rpool zfs create rpool/lxd # create lxd storage called zfspool using previous defined dataset lxc storage create zfspool zfs source=rpool/lxd # define default storage pool lxc profile device add default root disk path=/ pool=zfspool # initialize network sudo lxd init

airos

Anonymous (anonymous@undisclosed.example.com) — 2019-03-15T10:24:22+00:00

AirOS SNMP snmpwalk -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifDescr IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: wifi0 IF-MIB::ifDescr.5 = STRING: ath0 IF-MIB::ifDescr.6 = STRING: eth0.10 IF-MIB::ifDescr.7 = STRING: br0

3dprinter

Anonymous (anonymous@undisclosed.example.com) — 2022-01-23T14:31:23+00:00

3D printer Resources * hotend change * mount heatbreak and nozzle touching toghether and with 0.5mm gap between head and nozzle * preheat hotend at ABS temp * fix nozzle with 1nm torque * E3D V6 assembly * temperature tower * set combing mode to off z offset: subtract 0.25 to A4 paper without friction and without warm up

gstreamer

Anonymous (anonymous@undisclosed.example.com) — 2023-11-16T10:42:53+00:00

gstream jetson orin native URL=rtsp://192.168.1.1:7447/IFnqNlmdfTQxDOWV #URL=rtsp://192.168.2.35:7447/60e1a6425a20203019f719aa_1 gst-launch-1.0 rtspsrc location=$URL protocols=tcp latency=0 ! rtph264depay ! queue ! h264parse ! nvv4l2decoder ! nvvideoconvert ! autovideosink

gnss

Anonymous (anonymous@undisclosed.example.com) — 2022-08-25T21:03:09+00:00

GNSS * wonderful introduction on GNSS * stations that broadcast real time RTCM (protocol) Radio Technical Commission for Maritime * ubxtool examples * NEO-M9N * ZED-F9P 2022 Use gpsd as ntrip client on ublox device pygnssutils Configure ublox as base station and run an rtrip server with PyGPSClient 2020 ntrip caster * *

iidc

Anonymous (anonymous@undisclosed.example.com) — 2021-10-11T08:19:35+00:00

DCAM IIDC camera [ 1161.810809] usb 10-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1161.874950] usb 10-2: New USB device found, idVendor=1e10, idProduct=3300, bcdDevice= 0.00 [ 1161.874953] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1161.874955] usb 10-2: Product: Chameleon3 CM3-U3-31S4C [ 1161.874957] usb 10-2: Manufacturer: Point Grey Research [ 1161.874959] usb 10-2: SerialNumber: 01232DBD

server

Anonymous (anonymous@undisclosed.example.com) — 2018-03-21T10:56:51+00:00

Requirements HW: 2 nic device OS: Ubuntu server 17.10 apt install bash debootstrap schroot syslinux nfs-kernel-server tftpd-hpa xorriso pigz zfsutils-linux Optional config apt install isc-dhcp-server network config nano /etc/netplan/01-netcfg.yaml

llm

Anonymous (anonymous@undisclosed.example.com) — 2026-04-15T09:25:02+00:00

LLM * For Production Deployment: * Primary Choice: DeepSeek-R1 32B for reasoning-heavy applications * Coding Tasks: Qwen2.5-Coder 7B for optimal balance of capability and efficiency * General Purpose: Llama 3.3 70B for maximum versatility

licoli

Anonymous (anonymous@undisclosed.example.com) — 2017-07-10T06:27:02+00:00

Licoli Microflora di ceppi batterici e lieviti autoctoni: * maggiore conservazione del prodotto lievitato * maggiore digeribilità * profilo sensoriale gradevole Rispetto alla pasta madre presenta una velocità di fermentazione maggiore e una gestione dei rinfreschi più semplice.

proxmox

Anonymous (anonymous@undisclosed.example.com) — 2025-10-29T07:10:43+00:00

Proxmox Template # Set variables for easy customization VMID=9000 VM_NAME="ubuntu-2404-template" # A descriptive name for the template itself # Create the VM with your specified hardware qm create $VMID \ --name $VM_NAME \ --memory 8192 \ --cores 2 \ --net0 virtio,bridge=vmbr0,firewall=0 \ --net1 virtio,bridge=bridgek,firewall=0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --agent enabled=1 \ --boot order='scsi0;ide2'

zfs

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T10:22:24+00:00

zfs libvirt ZFS apt install zfsutils-linux sudo zfs list create filesystem 'lab' on 'LXD' pool sudo zfs create LXD/lab sudo zfs set mountpoint=/lab LXD/lab sudo zfs destroy LXD/lab create pool Pool can be created on disk or partition. In case of partition this is an example

pizza

Anonymous (anonymous@undisclosed.example.com) — 2018-11-29T20:08:09+00:00

Pizza Pizza scipio 2.0 Ingredienti per 1.68Kg di pasta (4 palle da 420g): * 1040 g farina di grano tenero tosano * 610 g di acqua senza cloro a temperatura ambiente * 30 g di sale * 30 g di olio * lievito di birra fresco: * 1.15g a 19 °C

jupyterhub

Anonymous (anonymous@undisclosed.example.com) — 2020-10-06T07:26:44+00:00

Jupyterhub * * (le credenziali sono in /root/passwdldapadmin) Cluster Il cluster kubernetes (che si appoggia su Rancher per una migliore versatilità) è composto da tre nodi master e tre nodi worker (che eseguono i container docker). Il tutto si pilota da interfaccia grafica o da

homeassistant

Anonymous (anonymous@undisclosed.example.com) — 2022-07-08T08:19:05+00:00

Home Assistant homeassistant domotic * home assistant * raspberry * Install * example 1 * pip3 install urllib3==1.20 --upgrade --target ~/.homeassistant/deps/ (telegram notify solved) upgrade pip install -U homeassistant and after restart home assistant with fabric * hass sudo apt install python3 python3-venv incron mc python3-dev libffi-dev libssl-dev python3 -m ve…

openvpn

Anonymous (anonymous@undisclosed.example.com) — 2018-06-14T15:54:03+00:00

Openvpn Certification Autorithy Create certificate folder apt-get install easy-rsa make-cadir /etc/easy-rsa-legnago cd /etc/easy-rsa-legnago Edit vars and source vars ./clean-all ./build-dh ./pkitool --initca server certificate NAME=legnago-gw ./pkitool --pass --server $NAME # create passphrase here openssl rsa -in keys/$NAME.key -out keys/$NAME.pem # give passphrase here chmod 600 keys/$NAME.pem

ladonnacannone

Anonymous (anonymous@undisclosed.example.com) — 2015-03-15T15:57:12+00:00

La donna cannone - Francesco De Gregori F G C F C G F G C C7 Butterò questo mio enorme cuore tra le stelle un giorno giuro che lo farò G A e oltre l'azzurro della tenda nell'azzurro io volerò Ab C quando la donna cannone d'oro e d'argento diventerà G G7 senza passare per la stazione l'ultimo treno prenderà C C7 in faccia ai maligni e ai superbi i…

ceph-on-k0s

Anonymous (anonymous@undisclosed.example.com) — 2024-10-31T07:46:44+00:00

ceph come storage backend Su ceph creare un pool per kubernetes (che ho chiamato appunto kubernetes) ubuntu@joint-mongoose:~$ helm repo add ceph-csi https://ceph.github.io/csi-charts ubuntu@joint-mongoose:~$ helm show values ceph-csi/ceph-csi-rbd > ceph-csi-helm.yaml

iotaiuto

Anonymous (anonymous@undisclosed.example.com) — 2020-08-21T08:31:42+00:00

IOTAIUTO PANORAMICA E PRINCIPI GENERALI # LA STRUTTURA DI QUESTA GUIDA SI ARTICOLA IN: # 1. risorse HW utilizzate # 2. passi necessari a rendere operativa ciascuna di esse # IL ROUTER ANDRA' CONFIGURATO AFFINCHE' A OGNI DEVICE SIA ASSEGNATO UN IP-ADDRESS-FISSO # NEL RANGE 192.168.1.221 - 192.168.1.240

vscode

Anonymous (anonymous@undisclosed.example.com) — 2025-09-13T19:44:38+00:00

vscode Visual Studio Code Editor base settings sudo apt install fonts-firacode paru -S ttf-fira-code { "editor.fontSize": 16, "editor.fontFamily": "Fira Code", "editor.fontLigatures": true, "window.zoomLevel": 1.5, "editor.tabSize": 4, "editor.insertSpaces": true, "python.formatting.provider": "black" }

zfs-on-root

Anonymous (anonymous@undisclosed.example.com) — 2018-03-09T09:57:26+00:00

Ubuntu on ZFS root zfs ubuntu * Livecd boot live cd and sudo su passwd ubuntu apt-add-repository universe apt update apt install openssh-server # connect from another PC via ssh apt install --yes debootstrap gdisk zfs-initramfs Disk Reset disk and create GPT partition schema

loadbalancing

Anonymous (anonymous@undisclosed.example.com) — 2024-12-12T14:45:35+00:00

MetalLB come loadBalancer La pagina ufficiale dell'installazione: Ho eseguito l'operazione preliminare “If you’re using kube-proxy in IPVS mode, since Kubernetes v1.14.2 you have to enable strict ARP mode.” Edito la configMap di kube-proxy:

tuttoaposto

Anonymous (anonymous@undisclosed.example.com) — 2015-03-13T18:31:09+00:00

Tutto a posto - Nomadi Tempo 4/4. Accordi a 2/4 eccetto _ _=4/4 F#m_ _ B F#m_ _ Le mie gambe oramai sono stanche e vorrei A B_ _ Dare un po' di sonno agli occhi miei F#m_ _ B F#m_ _ Scende l'oscurità, c'è una casa più in là A B_ _ F#m_ _ Il mio viaggio adesso finirà, è per lei... D E A D Io vedo quella ferrovia e fra i sassi la mia v…

k80

Anonymous (anonymous@undisclosed.example.com) — 2024-07-19T05:36:27+00:00

K80 pacman -S nvidia-470xx-dkms nvidia-470xx-settings nvidia-470xx-util pacman -U https://archive.archlinux.org/packages/c/cuda/cuda-11.4.2-1-x86_64.pkg.tar.zst nvidia-smi +-----------------------------------------------------------------------------+ | NVIDIA-SMI 470.256.02 Driver Version: 470.256.02 CUDA Version: 11.4 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | |…

esp32lora

Anonymous (anonymous@undisclosed.example.com) — 2020-03-21T15:02:36+00:00

ESP32 LORA * Wemos® SX1278 LoRa ESP32 Bluetooth WIFI 433MHZ amazon * example 1 interesting * example 2 * ESP32 development boards * LoRa library * coil antenna heltec esp32 lora Lora basic sender and receiver * SX1278 433MHz // re-define pin definitions of pins_arduino.h #define PIN_SPI_SS 18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input #define PIN_…

jetsonnano

Anonymous (anonymous@undisclosed.example.com) — 2023-11-16T07:39:23+00:00

Nvidia Jetson Nano * * interesting projects * cameras * camera search engine remove desktop apt remove -y ubuntu-desktop apt remove -y gnome-* apt remove -y chromium-browser chromium-codecs-ffmpeg-extra apt remove -y libreoffice* docker.io thunderbird bluez* apt remove -y libnvinfer-samples # remove snap systemctl stop snapd apt remove --purge --assume-yes snapd gnome-software-plugin-snap rm -rf /var/cache/snapd/ apt autoremo…

keyboard

Anonymous (anonymous@undisclosed.example.com) — 2020-01-28T13:00:40+00:00

corne littlekeyboards.com $122.36 * x1 * oled x2 * led x6 * pro micro x2 * no oled cover x2 * case x1 * PG1350 Kailh Low Profile Choc switches brown x42 * keycaps x42 * TRRS Cable x1 corner keypasss corne https://keyhive.xyz * keymap sample keymaps * istruzioni 1 * istruzio…

ansible

Anonymous (anonymous@undisclosed.example.com) — 2022-09-09T09:09:25+00:00

ansible basic op ansible all --list-hosts ansible all -m ping playbook - name: helloworld hosts: nodes tasks: - name: Ping my hosts ansible.builtin.ping: - name: Print message ansible.builtin.debug: msg: Hello world

blender

Anonymous (anonymous@undisclosed.example.com) — 2025-05-20T15:23:18+00:00

Blender 2.9 shortcuts * SHIFT z: switch wireframe and object mode * f: fill faces or edges between edges or vertex * a: select all * ALT+a: select nothing * c: circle select * b: box select * SHIFT+b: zoom to box * SHIFT+s: cursor move or selection move

video

Anonymous (anonymous@undisclosed.example.com) — 2020-09-02T13:59:46+00:00

Video TIPS Getting INFO avprobe Convert to webm ffmpeg -i input.video -threads 4 -b:v 1M -crf 10 output.webm Repair index mencoder -idx input.video -ovc copy -oac copy -o output.video from images to video # 5 images per seconds ffmpeg -y -framerate 5 -pattern_type glob -i '*.jpg' -c:v libx264 -vf "fps=25,scale=720:trunc(ow/a/2)*2" out.mp4

pm10

Anonymous (anonymous@undisclosed.example.com) — 2020-06-01T20:04:01+00:00

Progetto PM10 luftaden * home luftaden * mappa * rumore e biossido di azoto * kit PM10 con istruzioni * sensor community * Particulate Matter App * playstore * sorgenti github opensensemap * home opensensemap * API sensori * PM2.5 e PM10: Nova SDS011 Fyd SDS011 teoria * ozono: * MQ131: aliexpress 15€ * CJMCU-131 MQ131: aliexpress 35€ schema * temperatura e umidità: * TODO: i2c oppure one wire ? * luminosità:

liberidicomunicare

Anonymous (anonymous@undisclosed.example.com) — 2022-10-19T06:51:49+00:00

openedx * liberi di comunicare * user: stefano.scipioni@csgalileo.org * pass: e.... * ssh ubuntu@10.45.103.201 documentazione Installazione Requisiti: docker, libyaml-dev $ systemctl start docker $ pip install tutor[full] $ tutor local quickstart Account amministratore:

01_struttura_server

Anonymous (anonymous@undisclosed.example.com) — 2024-12-11T11:52:43+00:00

Struttura server Partendo da un fissato root path, al esempio /livenet, vediamo la struttura del server. E' una descrizione minimale, che verrà approfondita nel seguito. drwxr-xr-x 9 root root 4096 Nov 18 14:51 . drwxr-xr-x 23 root root 4096 Oct 24 08:24 .. drwxr-xr-x 7 root root 4096 Oct 9 09:00 aux drwxr-xr-x 8 root root 4096 Nov 13 12:38 .git drwxr-xr-x 10 root root 4096 Oct 31 13:25 images drwxr-xr-x 4 root root 4096 Nov 13 11:57 overlay drwxr-xr-x 11 root root 4096 Oct 31 08:16 rele…

galileo

Anonymous (anonymous@undisclosed.example.com) — 2024-07-19T08:21:44+00:00

VPN Galileo VPN PPTP/L2TP: * indirizzo server concentratore: vpn1.csgalileo.org * username e password yay -S networkmanager-l2tp networkmanager-strongswan aggiungere vpn L2TP pptp manual [connection] id=galileo uuid=97852b85-b57b-4b38-9687-d919f2820e57 type=vpn autoconnect=false permissions=user:scipio:; timestamp=1623922800 [vpn] gateway=94.230.76.2 mru=1400 mtu=1400 password-flags=0 user=xxx user-auth-type=password service-type=org.freedesktop.NetworkManager.l2tp [vpn-secr…

jibri

Anonymous (anonymous@undisclosed.example.com) — 2022-07-14T15:08:24+00:00

jibri docker jibri.yml inside ufficial docker-jitsi-meet does not work in swarm service (/dev/snd and xorg problems) clone a version of jibri with pulse and xdummy support git clone https://github.com/prayagsingh/docker-jibri-pulseaudio.git change Dockerfile with specific chrome version

onvif

Anonymous (anonymous@undisclosed.example.com) — 2019-01-08T17:09:28+00:00

ONVIF 1 yay libxml2 QUERY=GetDeviceInformation QUERY=GetSystemDateAndTime IP=10.220.1.7 curl -s http://$IP/onvif/device_service \ -d '<'$QUERY' xmlns="http://www.onvif.org/ver10/device/wsdl"/>' \ | xmllint --format -

esphome

Anonymous (anonymous@undisclosed.example.com) — 2021-07-06T05:26:41+00:00

ESPHOME ESP32 cam * rtsp into esp32cam progress #!/bin/sh TOKEN=... PAYLOAD="{\"directive\": {\"header\": {\"namespace\": \"Alexa.Discovery\", \"name\": \"Discover\", \"payloadVersion\": \"3\", \"messageId\": \"8db404f7-f5a1-495e-9a30-3a8af3bf94e0\"}, \"payload\": {\"scope\": {\"type\": \"BearerToken\", \"token\": \"...\"}}}}" curl -q -X POST \ -d "$PAYLOAD" \ -H "Authorization: Bearer $TOKEN" \ -H "Content-Type: application/json" \ http://localhost:8123/api/alexa/smart_home | j…

graphite

Anonymous (anonymous@undisclosed.example.com) — 2017-11-18T07:36:23+00:00

carbon, graphite and grafana carbon install carbon-cache service apt-get install graphite-carbon enable boot startup in /etc/default/graphite-carbon enable ENABLE_LOGROTATION in /etc/carbon/carbon.conf extend retentions [carbon] pattern = ^carbon\. retentions = 60:90d [default] pattern = .* retentions = 30s:7d,5m:30d,10m:1y,1d:10y

galileo

Anonymous (anonymous@undisclosed.example.com) — 2022-07-28T09:50:48+00:00

iotaiuto in galileo rete homessistant: * 10.1.17.0/24 * wifi homeassistant con pass 'homeassistant2022.' (punto finale) * gateway 10.1.17.254 raspberry: * 10.1.17.1 * connesso a SW-INGENGO-1 porta ether5 * * zwave:

bv9500

Anonymous (anonymous@undisclosed.example.com) — 2021-12-04T16:01:21+00:00

BV9500 pro Mediatek Helio P23 * supported devices * lineage install * lineage-19.0-20211106-UNOFFICIAL-treble_arm64_bvS.img.xz * tips on boot * stock ROM * twrp apply these settings from developer menù: * OEM unlock * debug usb adb commands adb devices # confirm on screen adb reboot bootloader fastboot flashing unlock # press volume up to confirm

docker

Anonymous (anonymous@undisclosed.example.com) — 2023-04-19T06:08:36+00:00

docker install apt-get install -y ca-certificates curl gnupg lsb-release curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \ $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null apt update apt-get install -y docker-ce docker-ce-cli container…

qemu

Anonymous (anonymous@undisclosed.example.com) — 2018-12-24T10:35:40+00:00

by nicola for livenet research Performance zfs * * * * * * *…

cremanocciole

Anonymous (anonymous@undisclosed.example.com) — 2017-11-12T15:21:32+00:00

Crema alle nocciole * 100g cioccolato fondente > 50% * 100g latte di soia vanigliato * 70g olio di semi di girasole * 60g nocciole tostate * 50g zucchero di canna * 50g cioccolato bianco * 10g cacao amaro * polverizzare zucchero e nocciole velocità turbo x 20 secondi

mdm

Anonymous (anonymous@undisclosed.example.com) — 2022-03-10T08:19:01+00:00

mobile device management (MDM) gestione app * scaricare apk o xapk da caricare su gianomdm il package assegnare il package al gruppo di test, ad esempio 'supervigili' successivamente, dopo i test, assegnare il package al gruppo 'vigili'

autofs

Anonymous (anonymous@undisclosed.example.com) — 2017-05-15T07:50:13+00:00

autofs sudo apt install autofs sudo mkdir /etc/auto.master.d/ debugging stop service and run foreground systemctl stop autofs sudo automount -f -v sshfs sudo apt install sshfs autofs use root account and ssh key has to be present in /root/.ssh

dac

Anonymous (anonymous@undisclosed.example.com) — 2016-07-27T18:00:30+00:00

DAC * interesting aplay -v -D plughw:1,0 test192.wav aplay -l [-L] flac -d 01-Wednesday\ Night\ Prayer\ Meeting.flac -c | aplay --device=hw:1,0 cat /proc/asound/card1/pcm0p/sub0/* pacmd list-sinks pactl list short sinks for card in `aplay -L | grep "CARD=DAC"`; do echo ./hw_params $card; ./hw_params $card | grep Sample; sleep 1; done

idrac

Anonymous (anonymous@undisclosed.example.com) — 2023-08-22T12:01:04+00:00

idrac java 1.7 * idrac console viewer works only with java 1.7 due to security restriction on newers java (see below) install java 1.7 on xenial 16.04 sudo add-apt-repository ppa:openjdk-r/ppa sudo apt-get update sudo apt-get install openjdk-7-jdk

rocm

Anonymous (anonymous@undisclosed.example.com) — 2026-02-15T07:33:08+00:00

References: - - - This report outlines the deployment of the Ollama LLM runtime on Arch Linux specifically tailored for the AMD Ryzen AI Max+ 395 APU. The primary focus is optimizing performance by leveraging the integrated Radeon 8060S iGPU through the

mycroft

Anonymous (anonymous@undisclosed.example.com) — 2021-12-15T12:10:31+00:00

Assistente vocale Mycroft Installazione * Scaricare * Estrarre lo zip * Flashare il file .img sulla sd del raspberry (si può usare balena etcher) * Aprire terminale nella partizione rootfs della scheda sd: sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

integration

Anonymous (anonymous@undisclosed.example.com) — 2015-08-07T09:14:43+00:00

Wamp Integration

install

Anonymous (anonymous@undisclosed.example.com) — 2022-10-03T10:23:10+00:00

Install from archlinux iso install on archiso zfs system from curl -s https://raw.githubusercontent.com/eoli3n/archiso-zfs/master/init | bash ext4 create partition DISK=ata-SSDPR-CX400-256-G2_GY3042305 sgdisk --clear -g $DISK sgdisk -n3:1M:+512M -t3:EF00 $DISK # boot partition or efi partition parted $DISK set 3 bios_grub on sgdisk -n1:0:0 -t1:8300 $DISK

networknamespaces

Anonymous (anonymous@undisclosed.example.com) — 2019-01-24T18:03:15+00:00

Network Namespaces setup install netns helper wget https://raw.githubusercontent.com/Lekensteyn/netns/master/netns -O /bin/netns chmod +x /bin/nets uncomment “net.ipv4.ip_forward=1” in /etc/sysctl.d/99-sysctl.conf enable NAT iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE iptables-save > /etc/firewall

18.04

Anonymous (anonymous@undisclosed.example.com) — 2018-08-21T05:01:47+00:00

18.04 bionic ZFS (guest) From running ZFS ubuntu on guest install newer system in new ZFS fs sudo su DISTRO=bionic apt install -y debootstrap zfs create -o canmount=noauto -o mountpoint=/$DISTRO rpool/ROOT/$DISTRO zfs mount rpool/ROOT/$DISTRO mount -o remount,dev /$DISTRO debootstrap $DISTRO /$DISTRO mount --rbind /dev /$DISTRO/dev mount --rbind /proc /$DISTRO/proc mount --rbind /sys /$DISTRO/sys chroot /$DISTRO /bin/bash --login

bike

Anonymous (anonymous@undisclosed.example.com) — 2019-10-20T16:15:06+00:00

bike HAIBIKE rear derailleurs manual wishlist * yishunbike.com * E1075 (size 19) + bafang M500 + bafang BT F03 battery * E861 (size 18) + shimano E8000 + darfon battery E4C0C-001 * * shimano E8000 + shimano E8035 * * SHIMANO e8000 + Darfon Battery E4C0C-001

dieta

Anonymous (anonymous@undisclosed.example.com) — 2025-05-25T08:25:35+00:00

Dieta Fase 1 (Prime 2 settimane) - Shock al Metabolismo Obiettivo: Ridurre l'infiammazione e sbloccare il grasso ostinato Dieta * Proteine: 1,8-2g per kg di peso (145-160g al giorno) → pollo, pesce, uova, tofu * Grassi buoni: Avocado, olio EVO, noci, salmone (30% delle calorie)

playground

Anonymous (anonymous@undisclosed.example.com) — 2022-11-30T06:33:34+00:00

do plugin numeri verbali [UNDONE)&limit=COUNT&md5=MD5&user=ASSIGNEE&creator=CREATOR&from=2022-04-01&to=2023-01-01] fileshare pagopa Headline mind map

plate

Anonymous (anonymous@undisclosed.example.com) — 2022-06-20T12:19:49+00:00

yolo train git clone https://github.com/puzzledqs/BBox-Label-Tool.git import os from os import walk, getcwd from PIL import Image classes = ["targa"] def convert(size, box): dw = 1./size[0] dh = 1./size[1] x = (box[0] + box[1])/2.0 y = (box[2] + box[3])/2.0 w = box[1] - box[0] h = box[3] - box[2] x = x*dw w = w*dw y = y*dh h = h*dh return (x,y,w,h) """-------------------------------------------------------------------""" """ Configur…

cordova

Anonymous (anonymous@undisclosed.example.com) — 2015-02-19T16:10:57+00:00

Cordova Install Install nodejs and npm sudo apt-get install nodejs npm Install cordova sudo npm install -g cordova cordova need node and ubuntu install nodejs sudo ln -s /usr/bin/nodejs /usr/local/bin/node install cordova-browser from git to have linux support

juju

Anonymous (anonymous@undisclosed.example.com) — 2020-07-30T14:11:56+00:00

JUJU manual cloud juju bootstrap testcloud manual/10.0.1.21 --upload-tools \ --config default-series=xenial \ --config apt-http-proxy="http://10.0.1.1:8000" \ --config agent-stream=devel # Controllare con juju model-config default-series # ed eventualmente correggere con juju model-config default-series=xenial

kyria

Anonymous (anonymous@undisclosed.example.com) — 2020-10-31T20:01:41+00:00

Kyria * my layout * schema Base Layer: QWERTY ,-------------------------------------------. ,-------------------------------------------. |RAIS/ESC| Q | W | E | R | T | | Y | U | I | O | P | | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| |Ctrl/BS | A | S | D | F | G | | H | …

ldap

Anonymous (anonymous@undisclosed.example.com) — 2019-09-24T09:59:27+00:00

LDAP users.ldif dn: ou=people,dc=csgalileo,dc=org objectClass: organizationalUnit ou: People dn: ou=groups,dc=csgalileo,dc=org objectClass: organizationalUnit ou: Groups dn: cn=users,ou=Groups,dc=csgalileo,dc=org cn: users gidNumber: 5159 objectclass: top objectclass: posixGroup dn: uid=igor,ou=People,dc=csgalileo,dc=org cn: Igor Rossetti givenName: Igor sn: Rossetti uid: igor uidNumber: 5159 gidNumber: 5159 homeDirectory: /home/igor loginShell: /bin/bash mail: igor@notme.please objectClas…

minikube

Anonymous (anonymous@undisclosed.example.com) — 2021-09-28T12:42:13+00:00

MiniKube Install Minikube on ubuntu Install minikube curl -LO https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64 sudo install minikube-linux-amd64 /usr/local/bin/minikube Install Kubectl curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl" sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl

test

Anonymous (anonymous@undisclosed.example.com) — 2021-04-21T06:32:00+00:00

Test Il test consiste nell'implementare un dialogo con protocollo http per l'interrogazione di un semplice web service. Sostanzialmente va realizzato in programmino in bash, python, nodejs o java con un punteggio di 10 punti. Il candidato ottiene 10 punti per ogni programma realizzato e funzionante, per un

windows10

Anonymous (anonymous@undisclosed.example.com) — 2018-09-07T16:57:45+00:00

Remove all windows 10 apps for future users Get-AppxProvisionedPackage -online | Remove-AppxProvisionedPackage -online Remove all windows 10 apps Get-AppxPackage -allusers | Remove-AppxPackage $AppsList = “Microsoft.MicrosoftOfficeHub”, # Get Office

zsh

Anonymous (anonymous@undisclosed.example.com) — 2018-11-05T09:38:35+00:00

Z shell keys * CTRL + U: this will clear the entire line install sudo apt install -y zsh sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)" chsh -s $(which zsh) plugins git clone git://github.com/zsh-users/zsh-autosuggestions $ZSH_CUSTOM/plugins/zsh-autosuggestions

syntax

Anonymous (anonymous@undisclosed.example.com) — 2021-03-04T17:35:19+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

mev2

Anonymous (anonymous@undisclosed.example.com) — 2023-04-13T13:01:53+00:00

Mev 2 Mev è una telecamera mobile, montata su un veicolo di controllo, che rileva le targhe della autovetture parcheggiate a bordo strada. Mev1 (attuale progetto): * piattaforma Jetson AGX Xavier * camere a colori con interfaccia USB3, 2 per lato vettura: *

esp32

Anonymous (anonymous@undisclosed.example.com) — 2021-07-03T06:36:01+00:00

ESP32 how to use pins esp32 chip only ESPCAM * upload code: GPIO 0 needs to be connected to GND * run code: remove GPIO 0 from GND and press the RST button Lolin32 lite * platformio specifications * ESP32 Module: ESP-WROOM-32 from Espressif. * 240MHz dual core microprocessor equipped with

micropython

Anonymous (anonymous@undisclosed.example.com) — 2018-11-03T07:46:32+00:00

micropython esptools / ampy pip install esptool pip install adafruit-ampy identify esptool.py chip_id esp32 Download firmware from erase flash (before any micropython deploy) export PORT=/dev/ttyUSB1 esptool.py --chip esp32 --port $PORT erase_flash

seamless

Anonymous (anonymous@undisclosed.example.com) — 2015-09-17T12:52:02+00:00

Seamless Windows RDP RemoteAPP Windows remote (guest) * reference * Activate remote connections * Install dot net runtime * Install remoteapptool * Activate allowlist for remoteapps with this regedit file


Windows Registry Editor Version 5.00


[HKEYLOCAL



mariadb
Anonymous (anonymous@undisclosed.example.com) — 2016-12-17T18:41:43+00:00
mariadb

cluster

	* 

Three Ubuntu 16.04 servers

install on each node


apt-key adv --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0xF1656F24C74CD1D8
add-apt-repository 'deb [arch=amd64] http://nyc2.mirrors.digitalocean.com/mariadb/repo/10.1/ubuntu xenial main'
apt update
apt install mariadb-server rsync


mssql
Anonymous (anonymous@undisclosed.example.com) — 2016-08-12T08:50:39+00:00
MSSQL

	* 
	* 

Install unixodbc version > 2.3.0


sudo apt-get remove libodbc1 unixodbc unixodbc-dev

wget ftp://ftp.unixodbc.org/pub/unixODBC/unixODBC-2.3.4.tar.gz
tar zxvf unixODBC-2.3.4.tar.gz 
cd unixODBC-2.3.4/
./configure --enable-gui=no --enable-drivers=no --enable-iconv --with-iconv-char-enc=U…


postgres
Anonymous (anonymous@undisclosed.example.com) — 2019-03-13T08:55:36+00:00
Postgres

Install

container xenial 16.04 (optional)


lxc image copy images:ubuntu/xenial/amd64 local: --alias xenial
lxc launch xenial postgres
lxc exec postgres bash



sudo apt install postgresql


eventually open network for remote connections


listen_addresses = '*'


redis
Anonymous (anonymous@undisclosed.example.com) — 2017-11-07T12:44:32+00:00
redis

	* from sql to redis
	* from mysql to redis

string

type string: store a value [integer, string, ...] belong a key [string]


SET connections 10
INCR connections => 11
INCR connections => 12
DEL connections
INCR connections => 1


expiring key


SET resource:lock "Redis Demo"
EXPIRE resource:lock 120


minecraft
Anonymous (anonymous@undisclosed.example.com) — 2017-08-19T07:53:51+00:00
Minecraft

Experiments

	* 

connection


from mcpi.minecraft import Minecraft
from mcpi import block

mc = Minecraft.create(address="192.168.2.35")


say “Hello World”


mc.postToChat("Hello world")


get position 


x, y, z = mc.player.getPos()


kuu
Anonymous (anonymous@undisclosed.example.com) — 2022-11-19T18:19:18+00:00
KUU flexones 360

power saving

/etc/tmpfiles.d/energyperformancepreference.conf


w /sys/devices/system/cpu/cpufreq/policy?/energy_performance_preference - - - - balance_power


accelerometer

/etc/udev/hwdb.d/61-sensor-local.hwdb


# edit and 'systemd-hwdb update'
sensor:modalias:acpi:KIOX010A:KIOX010A:*
 ACCEL_MOUNT_MATRIX=-1, 0, 0; 0, -1, 0; 0, 0, -1


linux
Anonymous (anonymous@undisclosed.example.com) — 2017-05-03T10:05:40+00:00
Linux

Base

edit /etc/locale.gen and run locale-gen


apt-get install wiringpi python-pip

# test GPIO
gpio readall


non fare con raspbian recenti


# apt install rpi-update
# rpi-update


camera


pip install "picamera[array]"



raspistill -tl 100 [-t 99999]


17.10
Anonymous (anonymous@undisclosed.example.com) — 2018-03-03T08:28:10+00:00
17.10 artful

ZFS (guest)

From running ZFS ubuntu on guest install newer system in new ZFS fs



sudo su
DISTRO=artful
apt install -y debootstrap
zfs create -o canmount=noauto -o mountpoint=/$DISTRO rpool/ROOT/$DISTRO
zfs mount rpool/ROOT/$DISTRO
mount -o remount,dev /$DISTRO
debootstrap $DISTRO /$DISTRO
mount --rbind /dev  /$DISTRO/dev
mount --rbind /proc /$DISTRO/proc
mount --rbind /sys  /$DISTRO/sys
chroot /$DISTRO /bin/bash --login


xenial
Anonymous (anonymous@undisclosed.example.com) — 2017-08-05T16:35:10+00:00
Xenial

bootable USB

Create usb bootable from iso


cp xenial.iso xenial-copy.iso
isohybrid xenial-copy.iso
dd if=xenial-copy.iso of=/dev/sd?


ssh

See 

Re-enable ssh-dss key in /etc/ssh/sshd_config


PubkeyAcceptedKeyTypes=+ssh-dss


~/.ssh/config


sirio
Anonymous (anonymous@undisclosed.example.com) — 2018-06-02T07:16:18+00:00
Sirio

	* sirio 10000p
		* connettore RS232 femmina
	*  software lettura sunvision2

TODO:


	* preparare un portatile con windows (anche virtualizzato):
		* il software sunvision2
		* un analizzatore seriale
		* cavo seriale-usb
		* il driver usb-seriale

	* andare in loco, collegarsi alla porta RS232 bassa (non display) e sniffare il protocollo


corne
Anonymous (anonymous@undisclosed.example.com) — 2022-02-02T07:23:12+00:00
Corne keyboard

	* miryoku
	* chocolate v3
	* my layout
	* adjust layer
	* logo editor
	* models compare
	* fifi
	* typing exercises
	* pro micro wireless DIY

qmk configurator


git clone https://github.com/qmk/qmk_firmware.git
cd qmk_firmware
./util/linux_install.sh

# qmk cli optional
export QMK_HOME=/lab/corne/qmk_firmware
python3 -mvenv venv
source venv/bin/activate
pip install qmk
cd $QMK_HOME
qmk setup


orin
Anonymous (anonymous@undisclosed.example.com) — 2023-03-20T15:26:47+00:00
orin

Carrier board DSBOARD-ORNX

jetpack



Install sdk manager and run it with:

	*  JetPack 5.1 for Target Operating System
	*  Jetson AGX Orin modules for Target Hardware
	*  no Host components
	*  no flash board

Download BSP, extract, update BSP and build rootfs


start
Anonymous (anonymous@undisclosed.example.com) — 2025-12-01T05:54:11+00:00
Noi siamo quello che siamo attraverso quello che siamo tutti


----------

----------


{{tag>[homeassistant domotic]}}


traefik
Anonymous (anonymous@undisclosed.example.com) — 2024-12-12T15:15:21+00:00
Documentazione:



ubuntu@kubectl:~$ helm repo add traefik https://traefik.github.io/charts
ubuntu@kubectl:~$ helm repo update
helm show values traefik/traefik > traefik.yaml


Abilitare la persistenza modificando queste voci (opure nell'ambiente di test usare una directory in /mnt/cephfs):


10_rsyslog_container
Anonymous (anonymous@undisclosed.example.com) — 2024-12-12T13:25:36+00:00
Avvia servizio di logging in container.

Avvio


$ task rsyslog


Lettura log


$ task logs


Note:

	*  i log vengono scritti in /livenet/log/
	*  la configurazione si trova nel file aux/logger/10config.conf
  * la rotazione è effettuata dallo script


dreampc
Anonymous (anonymous@undisclosed.example.com) — 2021-02-17T16:02:21+00:00
Dream PC

	* ASUS ROG STRIX X570-F GAMING AM4 Motherboard
	* AMD Ryzen 7 3700X Processor
	* Corsair Vengeance RGB DDR4 3200 MHz RAM - 8 GB x 2
	* Corsair H100i Hydro Series RGB High Performance CPU Cooler
	* Corsair iCUE Certified

	* GEFORCE RTX2060 SUPER 8GB GDDR6


hummus
Anonymous (anonymous@undisclosed.example.com) — 2015-09-05T10:59:01+00:00
Hummus

Ingredienti

	* 250 gr. Ceci cotti
	* 2 Cucchiai Cumino in polvere
	* 2 Spicchi Aglio
	* 50 gr. Succo Limone
	* 50 gr. Olio EVO
	* Peperoncino in polvere
	* un ciuffo Prezzemolo
	* 3 Cucchiai Semi di Sesamo o di Tahina (Pasta di Sesamo)
	* Yogurt


silence
Anonymous (anonymous@undisclosed.example.com) — 2024-06-17T18:45:01+00:00
Silence S01

pastiglie freno

	* anteriore:
		* FD546G1380
		* SFA709HH ?
		* tradeinn




	* posteriore:
		* FD548G1380
		* SBS 134 MS (sinterizzate)
		* amazon Yerbay Pastiglie freni anteriore/posteriore sinistra per Yamaha XTZ 750 Super Tenere 1989-1995 11 euro
		* amazon 10 euro




termoscud

	* Tucano Urbano Termoscud R217-X


todo
Anonymous (anonymous@undisclosed.example.com) — 2015-07-31T08:56:58+00:00
Todo

	* solenacee
	* esempio di alimentazione
	* esempio di alimentazione


turbolevo
Anonymous (anonymous@undisclosed.example.com) — 2021-02-06T14:01:26+00:00
Dezimal 2255 ist 8CF Hex

Dezimal 1800 ist 708 Hex. 0200 0 807, etwas trickreich

So, in short, whilst the 02002003 gives you an 800mm rolling radius, you can have a smaller effect by using 02000807 to replicate an 1800mm rolling radius, or to go back to a 2255mm (which I think is a 2.6 to 3.0 width on a 27.5” rim) you’d need to use 0200CF08


chiquitita
Anonymous (anonymous@undisclosed.example.com) — 2016-01-05T17:46:52+00:00
Chiquitita - Abba


A                               Asus4 A
Chiquitita, tell me what s wrong
                             E   Esus4 E
You re enchained by your own sorrow
E  D    E             E7            A    Asus4 A
In your eyes there is no hope for tomorrow
      A                       Asus4 A
How I hate to see you like this
         A              E     Esus4 E
There is no way you can deny it
E  D   E               E7            A   Asus4 A
I  can see that you re oh so sad, so quiet

A    …


ungiornoinsieme
Anonymous (anonymous@undisclosed.example.com) — 2015-03-13T18:22:49+00:00
Un giorno insieme - Nomadi

Tempo 4/4. Accordi a 2/4 eccetto _ _= 4/4


Intro: C  Em  Am  C  F  G  Em  G

C  G  Am Em F               Am          D_ _
Non dire niente  fra un minuto il giorno nascerà
  G_ _                   Em G7
e l'uomo che io ero morirà.
C G   Am Em F          Am        Dm_ _
Amica  mia     questa casa non è casa mia
    G_ _                       Em  G
col primo vento caldo me ne andrò.

      C_ _
Cielo grande cielo blu
       Am_ _
quanto spazio c’è lassù
   F         G  …


cvat
Anonymous (anonymous@undisclosed.example.com) — 2020-09-09T10:04:29+00:00
CVAT

Istruzioni per l' accesso al programma:

	*  Andare con chrome su 
	*  luca
		*  entrare come utente “luca” e password “lucaguiotto”
		*  cliccare su “ocr-11” → Jobs (quando finito passare a ocr-14)

	*  toli
		*  entrare come utente “toli” e password “tolitoli”


fdf
Anonymous (anonymous@undisclosed.example.com) — 2021-02-26T18:28:34+00:00
FDF

Dato un modello pdf e un file in formato FDF viene creato il documento pdf utilizzando pdftk


%FDF-1.2
1 0 obj
<>
/Fields[
    <>
    <>
    <>
    <>
    <>
    <>
    <>
    <>
    <>
    <>
    <

ftp
Anonymous (anonymous@undisclosed.example.com) — 2019-06-19T07:16:17+00:00
ftp server

pure ftpd


apt install pure-ftpd



groupadd ftpgroup
useradd ftpuser -g ftpgroup -s /sbin/nologin -d /dev/null
ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/60puredb

pure-pw useradd hass -u ftpuser -g ftpgroup -d /media/photo/ -m
pure-pw mkdb
systemctl restart pure-ftpd.service


ionic
Anonymous (anonymous@undisclosed.example.com) — 2017-08-07T11:54:45+00:00
Ionic

Prerequisites

nodejs (latest)


sudo apt-get install build-essential
# curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
# sudo apt install nodejs


nodeenv


sudo apt-get install python-pip
sudo pip install nodeenv


Create library


k0s
Anonymous (anonymous@undisclosed.example.com) — 2024-11-06T09:24:06+00:00
install


ubuntu@k0s-ctrl:~$ curl --proto '=https' --tlsv1.2 -sSf https://get.k0s.sh | sudo sh
ubuntu@k0s-ctrl:~$ k0s version
v1.31.1+k0s.1


Crea il servizio systemd:


ubuntu@k0s-ctrl:~$ sudo k0s install


Bootstrap controller

Bootstrap del nodo controller (non single mode)


openalpr
Anonymous (anonymous@undisclosed.example.com) — 2015-10-09T07:56:20+00:00
OpenALPR

Android

reference

Requirements

android sdk

android-ndk

/etc/profile.d/sdk.sh


export NDKROOT=/lab/sdk/android-ndk-r10e
export ANDROID_HOME=/lab/sdk/android-sdk-linux
export PATH=${PATH}:${NDKROOT}:${ANDROID_HOME}/tools:${ANDROID_HOME}/platform-tools/
export ANDROID_CMAKE_TOOLCHAIN=/lab/sdk/android-cmake/android.toolchain.cmake


pcb
Anonymous (anonymous@undisclosed.example.com) — 2021-05-11T13:43:27+00:00
PCB with CNC

	* my vevor 3018 cnc

	* reference
	* fritzing
	* online jscut guide
	* online ncviewer
	* online drill to gcode converter

	* TODO online carbide3d

CNC for PCB:

	*  22000RPM
	*  V-Bit cutter 30 degree 0.2mm
	*  first pass 0.04mm
	*  second pass 0.07mm with more feed

fritzing

Make electronic schema with fritzing


pulsar
Anonymous (anonymous@undisclosed.example.com) — 2019-09-23T13:44:32+00:00
Pulsar


wget https://archive.apache.org/dist/pulsar/pulsar-2.4.1/apache-pulsar-2.4.1-bin.tar.gz
tar xvfz apache-pulsar-2.4.1-bin.tar.gz
cd apache-pulsar-2.4.1

# connectors


# storage
wget https://archive.apache.org/dist/pulsar/pulsar-2.4.1/apache-pulsar-offloaders-2.4.1-bin.tar.gz
tar xvfz apache-pulsar-offloaders-2.4.1-bin.tar.gz
mv apache-pulsar-offloaders-2.4.1/offloaders offloaders


smartreader
Anonymous (anonymous@undisclosed.example.com) — 2018-12-31T10:43:42+00:00
smartreader

Spec

	* ID: 23d8:0285


[root@nero scipio.arch]# dmesg 
[  140.880499] usb 2-1.4.3: new full-speed USB device number 4 using xhci_hcd
[  140.953936] usb 2-1.4.3: device descriptor read/64, error -32
[  141.133931] usb 2-1.4.3: device descriptor read/64, error -32
[  141.313810] usb 2-1.4.3: new full-speed USB device number 5 using xhci_hcd
[  141.409163] usb 2-1.4.3: New USB device found, idVendor=23d8, idProduct=0285, bcdDevice= 1.00
[  141.409167] usb 2-1.4.3: New USB device stri…


vgpu
Anonymous (anonymous@undisclosed.example.com) — 2021-07-23T13:12:01+00:00
vgpu

host

	* TESLA T4  NVIDIA Corporation TU104GL
	* you must ensure that the SR-IOV SBIOS setting is enabled on the server.

into host


sudo apt install build-essential
echo 'blacklist nouveau' | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo reboot


hw
Anonymous (anonymous@undisclosed.example.com) — 2018-04-24T07:21:45+00:00
Hardware

Rele

	* sonos 4 ch RF and wifi

Energy

	* electrical power magnetic 2 channels

Allarme

Sirena

	* Strobe Sound Alarm Vision Security battery powered Z-Wave Plus

Controller

Controller zwave

	*  Mini controller USB Z-Wave plus

Contrroller IR (360°)

	* WIFI Universal ir Broadlink

Video sorveglianza

videocamera indoor

	*  ip cam wireless indoor

videocamera(outdoor)

	* ip cam wireless outdoor

ibeacon

Install app BeaconSET. Set params and save with password=minew123


influxdb
Anonymous (anonymous@undisclosed.example.com) — 2019-09-24T09:07:59+00:00
influxdb


curl -sL https://repos.influxdata.com/influxdb.key | apt-key add -
source /etc/lsb-release
echo "deb https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | tee -a /etc/apt/sources.list
apt update
apt install influxdb


iotaiuto_skill
Anonymous (anonymous@undisclosed.example.com) — 2020-10-01T09:34:20+00:00
iotaiuto skill



Flusso dati

ogni comando che arriva da alexa si traduce in una richiesta verso la skill 'iotaiuto' (metodo event_handler) il cui payload è:

	*  event
	*  context

in particolare event contiene awstoken (estratto dalla funzione get


tradfri
Anonymous (anonymous@undisclosed.example.com) — 2019-08-08T07:38:27+00:00
TRADFRI

INSTALLARE TRADFRI CUSTOM

	* Scaricare tradfri da 

	* Copiare la cartella tradfri in “/custom_components/”
in questo modo verrà sovrascritto il componente tradfri con il nostro componente custom

CONFIGURARE TRADFRI GATEWAY DA HOME ASSISTANT


doorbell
Anonymous (anonymous@undisclosed.example.com) — 2021-10-01T08:40:00+00:00
Doorbell

ESP32CAM

Esphome camera component

Esphome RTSPserver github



Per la prima scrittura:

	*  connettere uno dei pin di IO a GND, come mostrato in figura
	*  attaccare l'USB
	*  dare i permessi alla porta, esempio: 
chmod 660 /dev/ttyUSB0

	*  riavviare esphome
	*  uploadare la configurazione

Per le scritture wireless non serve che GND sia connesso a un pin di IO


led
Anonymous (anonymous@undisclosed.example.com) — 2021-12-24T09:10:41+00:00
LED

Collegare LED RGB a Raspberry Pi

Il pin più lungo del LED è il common, che sarà un anodo o un catodo a seconda della tipologia del LED.

Verificare la tipologia del LED

	* Mettere il multimetro in modalità contatto
	* Collegare il multimetro al common e a un altro pin qualsiasi


pnrr
Anonymous (anonymous@undisclosed.example.com) — 2023-06-07T14:46:18+00:00
pnrr

unifi controller

into switch


set-inform http://10.6.11.35:8080/inform


termostato
Anonymous (anonymous@undisclosed.example.com) — 2021-08-17T09:34:58+00:00
Termostato

	* LILYGO TTGO T5 V2.3_2.13] con display GxGDEM0213B74
		* esphome

	* DHT22
		* esphome
		* Vcc Power supply 3.5V to 5.5V


bootanimation
Anonymous (anonymous@undisclosed.example.com) — 2015-02-27T16:50:05+00:00
Android bootanimation


cd /lab/radxa/bootanimation
make

make upload


Copy bootanimation.zip into /lab/raxda*common/system/media

desc.txt


512 256 30
p 1 0 part0
p 0 0 part1


	* '523' is the width of the animation
	* '256' is the height of the animation


videoediting
Anonymous (anonymous@undisclosed.example.com) — 2019-09-25T11:29:25+00:00
Blender Video Editor

Concepts

There are n channels: channel 0 is seen in top of other, channel with major number is seen in top of others.

Stripes

Edit strip -> Blend -> Over Drop
Edit strip -> Image Offest -> X,Y

Select strip and Add -> Effect strip


minetest
Anonymous (anonymous@undisclosed.example.com) — 2017-08-18T20:28:15+00:00
Minetest

	* 

client


sudo apt install minetest


connect to cubo

commands:

	*  /home (and related /sethome)
	*  /teleport ,,
	*  /teleport 

keys:

	*  F5 	Shows player coordinates 	Shows server stats
	*  F7 	Changes camera view 	Cycles through camera views


dell
Anonymous (anonymous@undisclosed.example.com) — 2022-09-14T12:11:56+00:00
dell

perccli

download from 


cd /opt
tar xvf perccli_7.1-007.0127_linux.tar.gz
cd Linux
sudo apt-get install alien
alien -k perccli-007.0127.0000.0000-1.noarch.rpm
dpkg -i perccli_007.0127.0000.0000-1_all.deb


megaraid

Install on Ubuntu 22.04


apt install libncurses5
curl -L "https://github.com/matveynator/sysadminscripts/raw/main/debian/megacli_8.07.14-2_all.deb" > \
        /tmp/megacli_8.07.14-2_all.deb; d…


dell-t3600
Anonymous (anonymous@undisclosed.example.com) — 2017-10-15T14:19:44+00:00
Dell T3600

winzozz

Use Intel C600 SCU controller driver during installation (unzip *exe in external USB key).


gpio
Anonymous (anonymous@undisclosed.example.com) — 2015-02-21T09:40:53+00:00
GPIO on Radxa

	*  Headers schema
	*  Android APP that read GPIO

Power on blue led


echo default-on > /sys/class/leds/blue/trigger


Power off


echo none > /sys/class/leds/blue/trigger


Header J8
1234567 OUT89 IN101112namenpinheader0A7|167|7|J8|
|0B11699J8PWM228511J8
Input on pin 169 (GPIO0_B1) (pin n°9 su J8)


locale
Anonymous (anonymous@undisclosed.example.com) — 2018-02-08T16:12:26+00:00
post install for servers


apt install -y curl && \
curl -s "http://wiki.csgalileo.org/tips:ubuntu:locale?do=export_code&codeblock=1" | /bin/bash



apt remove -y unattended-upgrades

locale-gen it_IT.UTF-8
locale-gen en_US.UTF-8
update-locale LANG=it_IT.UTF-8 LC_MESSAGES=POSIX
timedatectl set-timezone Europe/Rome

grep -q menu-complete /etc/inputrc
if  [ $? = 1 ]; then
cat >> /etc/inputrc <

trusty
Anonymous (anonymous@undisclosed.example.com) — 2015-12-08T09:21:17+00:00
Ubuntu 14.04 trusty

post install

disable non needed packages


sudo apt-get remove modemmanager
echo manual > /etc/init/whoopsie.override


non free


sudo apt-get install ubuntu-restricted-extras
sudo apt-get install linux-firmware-nonfree


utils


yakkety
Anonymous (anonymous@undisclosed.example.com) — 2016-12-12T07:47:15+00:00
Yakkety

ZFS

	* 

AMD radeon GX

	* 


motorizzazione
Anonymous (anonymous@undisclosed.example.com) — 2019-03-19T14:52:10+00:00
Motorizzazione

Motorizzazione uses cisco anyconnect VPN, available in linux with openconnect.

credenziali

Credenziali VPN:
For Municipalities (Local Police) username begins: COM.xxxxxxxxxxxx
For Police, the State Police and other police forces VPN credentials are not provided. Therefore we must try to request them to CED Interagency Ministry.