Galileo Labs

syntax

Anonymous (anonymous@undisclosed.example.com) — 2021-03-04T17:35:19+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

turbolevo

Anonymous (anonymous@undisclosed.example.com) — 2022-04-24T08:14:12+00:00

turbolevo canbus * canbus basic * exploring canbus * canbus esp32 project * tutorial * transreceiver SN65HVD230 datasheet example ESP32 project * transreveiver TJA1050T: datasheet * firmware * * BMS Same port charge and discharge balance PCM for 36V * B-: Connect to the negative pole of the battery pack * P-: No Connect * C-: Connect to the negative electrode of charge and discharge

alhambra

Anonymous (anonymous@undisclosed.example.com) — 2015-06-10T06:29:49+00:00

Recuerdos de l'alhambra - Tarrega part 1: 0 4 1 3 3 2 <--fingering E||--------------------------------------------------| B||----5-5-5---5-5-5---5-5-5---5-5-5---3-3-3---3-3-3-| G||------------------5---------------4---------------| D||----------2---------------2---------------2-------| A||--0-----------------------------------------------| E||--------------------------------------------------| 1 2 3 3 -----…

esp32lora

Anonymous (anonymous@undisclosed.example.com) — 2020-03-21T15:02:36+00:00

ESP32 LORA * Wemos® SX1278 LoRa ESP32 Bluetooth WIFI 433MHZ amazon * example 1 interesting * example 2 * ESP32 development boards * LoRa library * coil antenna heltec esp32 lora Lora basic sender and receiver * SX1278 433MHz // re-define pin definitions of pins_arduino.h #define PIN_SPI_SS 18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input #define PIN_…

airos

Anonymous (anonymous@undisclosed.example.com) — 2019-03-15T10:24:22+00:00

AirOS SNMP snmpwalk -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifDescr IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 IF-MIB::ifDescr.4 = STRING: wifi0 IF-MIB::ifDescr.5 = STRING: ath0 IF-MIB::ifDescr.6 = STRING: eth0.10 IF-MIB::ifDescr.7 = STRING: br0

rocm

Anonymous (anonymous@undisclosed.example.com) — 2026-02-15T07:33:08+00:00

References: - - - This report outlines the deployment of the Ollama LLM runtime on Arch Linux specifically tailored for the AMD Ryzen AI Max+ 395 APU. The primary focus is optimizing performance by leveraging the integrated Radeon 8060S iGPU through the

licoli

Anonymous (anonymous@undisclosed.example.com) — 2017-07-10T06:27:02+00:00

Licoli Microflora di ceppi batterici e lieviti autoctoni: * maggiore conservazione del prodotto lievitato * maggiore digeribilità * profilo sensoriale gradevole Rispetto alla pasta madre presenta una velocità di fermentazione maggiore e una gestione dei rinfreschi più semplice.

lxd

Anonymous (anonymous@undisclosed.example.com) — 2019-11-19T18:12:12+00:00

LXD lxd install apt remove lxd lxd-client snap install lxd # create zfs dataset on pool rpool zfs create rpool/lxd # create lxd storage called zfspool using previous defined dataset lxc storage create zfspool zfs source=rpool/lxd # define default storage pool lxc profile device add default root disk path=/ pool=zfspool # initialize network sudo lxd init

01_struttura_server

Anonymous (anonymous@undisclosed.example.com) — 2024-12-11T11:52:43+00:00

Struttura server Partendo da un fissato root path, al esempio /livenet, vediamo la struttura del server. E' una descrizione minimale, che verrà approfondita nel seguito. drwxr-xr-x 9 root root 4096 Nov 18 14:51 . drwxr-xr-x 23 root root 4096 Oct 24 08:24 .. drwxr-xr-x 7 root root 4096 Oct 9 09:00 aux drwxr-xr-x 8 root root 4096 Nov 13 12:38 .git drwxr-xr-x 10 root root 4096 Oct 31 13:25 images drwxr-xr-x 4 root root 4096 Nov 13 11:57 overlay drwxr-xr-x 11 root root 4096 Oct 31 08:16 rele…

atom

Anonymous (anonymous@undisclosed.example.com) — 2017-10-15T18:32:21+00:00

Atom IDE download and install update /usr/local/bin/atom-update #!/bin/bash wget -q https://github.com/atom/atom/releases/latest -O /tmp/latest MATCHEDROW=$(awk -F '[<>]' '/href=".*atom-amd64.deb/' /tmp/latest) LATEST=$(echo $MATCHEDROW | grep -o -P '(?<=href=").*(?=" rel)') VER_LATEST=$(echo $MATCHEDROW | rev | cut -d"/" -f 2 | rev | sed 's/v//g') VER_INST=$(dpkg -l atom | tail -n1 | tr -s ' ' | cut -d" " -f 3) if [ "$VER_LATEST" != "$VER_INST" ]; then wget --progress=bar -q "https:…

gstreamer

Anonymous (anonymous@undisclosed.example.com) — 2023-11-16T10:42:53+00:00

gstream jetson orin native URL=rtsp://192.168.1.1:7447/IFnqNlmdfTQxDOWV #URL=rtsp://192.168.2.35:7447/60e1a6425a20203019f719aa_1 gst-launch-1.0 rtspsrc location=$URL protocols=tcp latency=0 ! rtph264depay ! queue ! h264parse ! nvv4l2decoder ! nvvideoconvert ! autovideosink

idrac

Anonymous (anonymous@undisclosed.example.com) — 2023-08-22T12:01:04+00:00

idrac java 1.7 * idrac console viewer works only with java 1.7 due to security restriction on newers java (see below) install java 1.7 on xenial 16.04 sudo add-apt-repository ppa:openjdk-r/ppa sudo apt-get update sudo apt-get install openjdk-7-jdk

iotaiuto

Anonymous (anonymous@undisclosed.example.com) — 2020-08-21T08:31:42+00:00

IOTAIUTO PANORAMICA E PRINCIPI GENERALI # LA STRUTTURA DI QUESTA GUIDA SI ARTICOLA IN: # 1. risorse HW utilizzate # 2. passi necessari a rendere operativa ciascuna di esse # IL ROUTER ANDRA' CONFIGURATO AFFINCHE' A OGNI DEVICE SIA ASSEGNATO UN IP-ADDRESS-FISSO # NEL RANGE 192.168.1.221 - 192.168.1.240

totem

Anonymous (anonymous@undisclosed.example.com) — 2021-08-26T13:55:10+00:00

Totem * alimentazione o din o ciabatta * ciabatta * 5V * 12V * access point mikrotik 12V o 24V * sim * termostato 5V * epaper TTGO * sensore temperatura e umidità * sensore co2 * serratura 12V * stampa porta 3d + molla di spinta

llm

Anonymous (anonymous@undisclosed.example.com) — 2026-04-15T09:25:02+00:00

LLM * For Production Deployment: * Primary Choice: DeepSeek-R1 32B for reasoning-heavy applications * Coding Tasks: Qwen2.5-Coder 7B for optimal balance of capability and efficiency * General Purpose: Llama 3.3 70B for maximum versatility

mev2

Anonymous (anonymous@undisclosed.example.com) — 2023-04-13T13:01:53+00:00

Mev 2 Mev è una telecamera mobile, montata su un veicolo di controllo, che rileva le targhe della autovetture parcheggiate a bordo strada. Mev1 (attuale progetto): * piattaforma Jetson AGX Xavier * camere a colori con interfaccia USB3, 2 per lato vettura: *

esphome

Anonymous (anonymous@undisclosed.example.com) — 2021-07-06T05:26:41+00:00

ESPHOME ESP32 cam * rtsp into esp32cam progress #!/bin/sh TOKEN=... PAYLOAD="{\"directive\": {\"header\": {\"namespace\": \"Alexa.Discovery\", \"name\": \"Discover\", \"payloadVersion\": \"3\", \"messageId\": \"8db404f7-f5a1-495e-9a30-3a8af3bf94e0\"}, \"payload\": {\"scope\": {\"type\": \"BearerToken\", \"token\": \"...\"}}}}" curl -q -X POST \ -d "$PAYLOAD" \ -H "Authorization: Bearer $TOKEN" \ -H "Content-Type: application/json" \ http://localhost:8123/api/alexa/smart_home | j…

install

Anonymous (anonymous@undisclosed.example.com) — 2022-10-03T10:23:10+00:00

Install from archlinux iso install on archiso zfs system from curl -s https://raw.githubusercontent.com/eoli3n/archiso-zfs/master/init | bash ext4 create partition DISK=ata-SSDPR-CX400-256-G2_GY3042305 sgdisk --clear -g $DISK sgdisk -n3:1M:+512M -t3:EF00 $DISK # boot partition or efi partition parted $DISK set 3 bios_grub on sgdisk -n1:0:0 -t1:8300 $DISK

dell

Anonymous (anonymous@undisclosed.example.com) — 2022-09-14T12:11:56+00:00

dell perccli download from cd /opt tar xvf perccli_7.1-007.0127_linux.tar.gz cd Linux sudo apt-get install alien alien -k perccli-007.0127.0000.0000-1.noarch.rpm dpkg -i perccli_007.0127.0000.0000-1_all.deb megaraid Install on Ubuntu 22.04 apt install libncurses5 curl -L "https://github.com/matveynator/sysadminscripts/raw/main/debian/megacli_8.07.14-2_all.deb" > \ /tmp/megacli_8.07.14-2_all.deb; d…

zfs-on-root

Anonymous (anonymous@undisclosed.example.com) — 2018-03-09T09:57:26+00:00

Ubuntu on ZFS root zfs ubuntu * Livecd boot live cd and sudo su passwd ubuntu apt-add-repository universe apt update apt install openssh-server # connect from another PC via ssh apt install --yes debootstrap gdisk zfs-initramfs Disk Reset disk and create GPT partition schema

3dprinter

Anonymous (anonymous@undisclosed.example.com) — 2022-01-23T14:31:23+00:00

3D printer Resources * hotend change * mount heatbreak and nozzle touching toghether and with 0.5mm gap between head and nozzle * preheat hotend at ABS temp * fix nozzle with 1nm torque * E3D V6 assembly * temperature tower * set combing mode to off z offset: subtract 0.25 to A4 paper without friction and without warm up

minikube

Anonymous (anonymous@undisclosed.example.com) — 2021-09-28T12:42:13+00:00

MiniKube Install Minikube on ubuntu Install minikube curl -LO https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64 sudo install minikube-linux-amd64 /usr/local/bin/minikube Install Kubectl curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl" sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl

jetsonnano

Anonymous (anonymous@undisclosed.example.com) — 2023-11-16T07:39:23+00:00

Nvidia Jetson Nano * * interesting projects * cameras * camera search engine remove desktop apt remove -y ubuntu-desktop apt remove -y gnome-* apt remove -y chromium-browser chromium-codecs-ffmpeg-extra apt remove -y libreoffice* docker.io thunderbird bluez* apt remove -y libnvinfer-samples # remove snap systemctl stop snapd apt remove --purge --assume-yes snapd gnome-software-plugin-snap rm -rf /var/cache/snapd/ apt autoremo…

vscode

Anonymous (anonymous@undisclosed.example.com) — 2025-09-13T19:44:38+00:00

vscode Visual Studio Code Editor base settings sudo apt install fonts-firacode paru -S ttf-fira-code { "editor.fontSize": 16, "editor.fontFamily": "Fira Code", "editor.fontLigatures": true, "window.zoomLevel": 1.5, "editor.tabSize": 4, "editor.insertSpaces": true, "python.formatting.provider": "black" }

kinectv2

Anonymous (anonymous@undisclosed.example.com) — 2015-05-09T06:06:29+00:00

Kinect device /etc/udev/rules.d/90-kinect2.rules # ATTR{product}=="Kinect2" SUBSYSTEM=="usb", ATTR{idVendor}=="045e", ATTR{idProduct}=="02c4", MODE="0666" SUBSYSTEM=="usb", ATTR{idVendor}=="045e", ATTR{idProduct}=="02d8", MODE="0666" SUBSYSTEM=="usb", ATTR{idVendor}=="045e", ATTR{idProduct}=="02d9", MODE="0666"

iidc

Anonymous (anonymous@undisclosed.example.com) — 2021-10-11T08:19:35+00:00

DCAM IIDC camera [ 1161.810809] usb 10-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1161.874950] usb 10-2: New USB device found, idVendor=1e10, idProduct=3300, bcdDevice= 0.00 [ 1161.874953] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1161.874955] usb 10-2: Product: Chameleon3 CM3-U3-31S4C [ 1161.874957] usb 10-2: Manufacturer: Point Grey Research [ 1161.874959] usb 10-2: SerialNumber: 01232DBD

qemu

Anonymous (anonymous@undisclosed.example.com) — 2018-12-24T10:35:40+00:00

by nicola for livenet research Performance zfs * * * * * * *…

keyboard

Anonymous (anonymous@undisclosed.example.com) — 2020-01-28T13:00:40+00:00

corne littlekeyboards.com $122.36 * x1 * oled x2 * led x6 * pro micro x2 * no oled cover x2 * case x1 * PG1350 Kailh Low Profile Choc switches brown x42 * keycaps x42 * TRRS Cable x1 corner keypasss corne https://keyhive.xyz * keymap sample keymaps * istruzioni 1 * istruzio…

fdf

Anonymous (anonymous@undisclosed.example.com) — 2021-02-26T18:28:34+00:00

FDF Dato un modello pdf e un file in formato FDF viene creato il documento pdf utilizzando pdftk %FDF-1.2 1 0 obj <> /Fields[ <> <> <> <> <> <> <> <> <> <> <

gnss

Anonymous (anonymous@undisclosed.example.com) — 2022-08-25T21:03:09+00:00

GNSS * wonderful introduction on GNSS * stations that broadcast real time RTCM (protocol) Radio Technical Commission for Maritime * ubxtool examples * NEO-M9N * ZED-F9P 2022 Use gpsd as ntrip client on ublox device pygnssutils Configure ublox as base station and run an rtrip server with PyGPSClient 2020 ntrip caster * *

k80

Anonymous (anonymous@undisclosed.example.com) — 2024-07-19T05:36:27+00:00

K80 pacman -S nvidia-470xx-dkms nvidia-470xx-settings nvidia-470xx-util pacman -U https://archive.archlinux.org/packages/c/cuda/cuda-11.4.2-1-x86_64.pkg.tar.zst nvidia-smi +-----------------------------------------------------------------------------+ | NVIDIA-SMI 470.256.02 Driver Version: 470.256.02 CUDA Version: 11.4 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | |…

video

Anonymous (anonymous@undisclosed.example.com) — 2020-09-02T13:59:46+00:00

Video TIPS Getting INFO avprobe Convert to webm ffmpeg -i input.video -threads 4 -b:v 1M -crf 10 output.webm Repair index mencoder -idx input.video -ovc copy -oac copy -o output.video from images to video # 5 images per seconds ffmpeg -y -framerate 5 -pattern_type glob -i '*.jpg' -c:v libx264 -vf "fps=25,scale=720:trunc(ow/a/2)*2" out.mp4

electronic

Anonymous (anonymous@undisclosed.example.com) — 2018-02-17T11:06:31+00:00

Electronic * humidity sensor * lora esp32 pinout * I2C Blue OLED LCD Display DIY Oled Module SSD1306

scipiodev

Anonymous (anonymous@undisclosed.example.com) — 2018-06-19T09:27:44+00:00

scipio dev environmnet prereq prereq on my dev machine sudo apt install schroot pigz debootstrap syslinux nfs-kernel-server tftpd-hpa xorriso pxelinux zfsutils-linux cd /lab/livenet/livenet-server rm -fR /etc/schroot/livenet ln -s `pwd`/etc/schroot/livenet /etc/schroot/ [ -f /etc/default/livenet ] || cp -a etc/default/livenet /etc/default/livenet zfs set sharenfs=ro rpool/livenet/backups

galileo

Anonymous (anonymous@undisclosed.example.com) — 2024-07-19T08:21:44+00:00

VPN Galileo VPN PPTP/L2TP: * indirizzo server concentratore: vpn1.csgalileo.org * username e password yay -S networkmanager-l2tp networkmanager-strongswan aggiungere vpn L2TP pptp manual [connection] id=galileo uuid=97852b85-b57b-4b38-9687-d919f2820e57 type=vpn autoconnect=false permissions=user:scipio:; timestamp=1623922800 [vpn] gateway=94.230.76.2 mru=1400 mtu=1400 password-flags=0 user=xxx user-auth-type=password service-type=org.freedesktop.NetworkManager.l2tp [vpn-secr…

openvpn

Anonymous (anonymous@undisclosed.example.com) — 2018-06-14T15:54:03+00:00

Openvpn Certification Autorithy Create certificate folder apt-get install easy-rsa make-cadir /etc/easy-rsa-legnago cd /etc/easy-rsa-legnago Edit vars and source vars ./clean-all ./build-dh ./pkitool --initca server certificate NAME=legnago-gw ./pkitool --pass --server $NAME # create passphrase here openssl rsa -in keys/$NAME.key -out keys/$NAME.pem # give passphrase here chmod 600 keys/$NAME.pem

dieta

Anonymous (anonymous@undisclosed.example.com) — 2025-05-25T08:25:35+00:00

Dieta Fase 1 (Prime 2 settimane) - Shock al Metabolismo Obiettivo: Ridurre l'infiammazione e sbloccare il grasso ostinato Dieta * Proteine: 1,8-2g per kg di peso (145-160g al giorno) → pollo, pesce, uova, tofu * Grassi buoni: Avocado, olio EVO, noci, salmone (30% delle calorie)

pane

Anonymous (anonymous@undisclosed.example.com) — 2017-12-10T09:30:45+00:00

Pane Senza impasto Riferimenti: * Ingredienti: * 500 g di farina tipo 1 * 400 g di acqua a temperatura ambiente * 60 g di licoli (in estate), 90g in inverno * 12 g di sale integrale Preparazione * mescolare la farina con il sale in una ciotola

pizza

Anonymous (anonymous@undisclosed.example.com) — 2018-11-29T20:08:09+00:00

Pizza Pizza scipio 2.0 Ingredienti per 1.68Kg di pasta (4 palle da 420g): * 1040 g farina di grano tenero tosano * 610 g di acqua senza cloro a temperatura ambiente * 30 g di sale * 30 g di olio * lievito di birra fresco: * 1.15g a 19 °C

turbolevo

Anonymous (anonymous@undisclosed.example.com) — 2021-02-06T14:01:26+00:00

Dezimal 2255 ist 8CF Hex Dezimal 1800 ist 708 Hex. 0200 0 807, etwas trickreich So, in short, whilst the 02002003 gives you an 800mm rolling radius, you can have a smaller effect by using 02000807 to replicate an 1800mm rolling radius, or to go back to a 2255mm (which I think is a 2.6 to 3.0 width on a 27.5” rim) you’d need to use 0200CF08

audio

Anonymous (anonymous@undisclosed.example.com) — 2017-05-16T14:27:59+00:00

Audio pulse headless sudo apt install pulseaudio pulseaudio-module-zeroconf gstreamer1.0-plugins-base-apps gstreamer1.0-pulseaudio # systemd service spec for pulseaudio running in system mode -- not recommended though! # on arch, put it under /etc/systemd/system/pulseaudio.service # start with: systemctl start pulseaudio.service # enable on boot: systemctl enable pulseaudio.service [Unit] Description=Pulseaudio sound server After=avahi-daemon.service network.target [Service] ExecStart=/…

otp

Anonymous (anonymous@undisclosed.example.com) — 2020-12-05T15:23:08+00:00

oath PREREQUISITO: INSTALLARE liboath0 libpam-oath oathtool 1) $ export HEX_SECRET=$(head -15 /dev/urandom | sha1sum | cut -b 1-30) 2) $ oathtool --verbose --totp $HEX_SECRET --digits=8 Risultato -> Hex secret: b5abe8im355c1127sd385a6dd0597x Base32 secret: YWV2RLGFVQUSPLMZTJW5QQQ8 Digits: 8 Window size: 0 Step size (seconds): 30 Start time: 1970-01-01 00:00:00 UTC (0) Current time: 2020-07-26 15:03:57 UTC (1595775837) Counter: 0x32BA74F (53192527)

pulsar

Anonymous (anonymous@undisclosed.example.com) — 2019-09-23T13:44:32+00:00

Pulsar wget https://archive.apache.org/dist/pulsar/pulsar-2.4.1/apache-pulsar-2.4.1-bin.tar.gz tar xvfz apache-pulsar-2.4.1-bin.tar.gz cd apache-pulsar-2.4.1 # connectors # storage wget https://archive.apache.org/dist/pulsar/pulsar-2.4.1/apache-pulsar-offloaders-2.4.1-bin.tar.gz tar xvfz apache-pulsar-offloaders-2.4.1-bin.tar.gz mv apache-pulsar-offloaders-2.4.1/offloaders offloaders

Anonymous (anonymous@undisclosed.example.com) — 2022-04-12T06:07:33+00:00

Telegram telegram bot channel send message to channel from bot (BOTAPIKEY required): * add bot to channel as admin * send message curl https://api.telegram.org/bot[BOT_API_KEY]/sendMessage?chat_id=@[MY_CHANNEL_NAME]&text=[MY_MESSAGE_TEXT] BOT Create BOT with

zabbix

Anonymous (anonymous@undisclosed.example.com) — 2021-08-02T09:22:06+00:00

Zabbix task * dashboard con conteggi aggregati (e altri grafici interessanti) * trigger di allarme: * luce accesa da troppo tempo * export dati csv con API * gestire utente non privilegiato su zabbix * VPN robusta che riparte quando il cloud non è raggiungibile

esp32

Anonymous (anonymous@undisclosed.example.com) — 2021-07-03T06:36:01+00:00

ESP32 how to use pins esp32 chip only ESPCAM * upload code: GPIO 0 needs to be connected to GND * run code: remove GPIO 0 from GND and press the RST button Lolin32 lite * platformio specifications * ESP32 Module: ESP-WROOM-32 from Espressif. * 240MHz dual core microprocessor equipped with

homeassistant

Anonymous (anonymous@undisclosed.example.com) — 2022-07-08T08:19:05+00:00

Home Assistant homeassistant domotic * home assistant * raspberry * Install * example 1 * pip3 install urllib3==1.20 --upgrade --target ~/.homeassistant/deps/ (telegram notify solved) upgrade pip install -U homeassistant and after restart home assistant with fabric * hass sudo apt install python3 python3-venv incron mc python3-dev libffi-dev libssl-dev python3 -m ve…

iotaiuto_skill

Anonymous (anonymous@undisclosed.example.com) — 2020-10-01T09:34:20+00:00

iotaiuto skill Flusso dati ogni comando che arriva da alexa si traduce in una richiesta verso la skill 'iotaiuto' (metodo event_handler) il cui payload è: * event * context in particolare event contiene awstoken (estratto dalla funzione get

pm10

Anonymous (anonymous@undisclosed.example.com) — 2020-06-01T20:04:01+00:00

Progetto PM10 luftaden * home luftaden * mappa * rumore e biossido di azoto * kit PM10 con istruzioni * sensor community * Particulate Matter App * playstore * sorgenti github opensensemap * home opensensemap * API sensori * PM2.5 e PM10: Nova SDS011 Fyd SDS011 teoria * ozono: * MQ131: aliexpress 15€ * CJMCU-131 MQ131: aliexpress 35€ schema * temperatura e umidità: * TODO: i2c oppure one wire ? * luminosità:

doorbell

Anonymous (anonymous@undisclosed.example.com) — 2021-10-01T08:40:00+00:00

Doorbell ESP32CAM Esphome camera component Esphome RTSPserver github Per la prima scrittura: * connettere uno dei pin di IO a GND, come mostrato in figura * attaccare l'USB * dare i permessi alla porta, esempio: chmod 660 /dev/ttyUSB0 * riavviare esphome * uploadare la configurazione Per le scritture wireless non serve che GND sia connesso a un pin di IO

server

Anonymous (anonymous@undisclosed.example.com) — 2018-03-21T10:56:51+00:00

Requirements HW: 2 nic device OS: Ubuntu server 17.10 apt install bash debootstrap schroot syslinux nfs-kernel-server tftpd-hpa xorriso pigz zfsutils-linux Optional config apt install isc-dhcp-server network config nano /etc/netplan/01-netcfg.yaml

bv7000

Anonymous (anonymous@undisclosed.example.com) — 2017-07-24T07:29:59+00:00

BV7000 PRO Upgrade firmware * download SP flash tool for linux (latest release) from * download firmware from and unzip * install libpng12 from deb untar flash tool and chmod +x flash_tool* run sudo ./flash_tool.sh * go to “download section

videoediting

Anonymous (anonymous@undisclosed.example.com) — 2019-09-25T11:29:25+00:00

Blender Video Editor Concepts There are n channels: channel 0 is seen in top of other, channel with major number is seen in top of others. Stripes Edit strip -> Blend -> Over Drop Edit strip -> Image Offest -> X,Y Select strip and Add -> Effect strip

postgres

Anonymous (anonymous@undisclosed.example.com) — 2019-03-13T08:55:36+00:00

Postgres Install container xenial 16.04 (optional) lxc image copy images:ubuntu/xenial/amd64 local: --alias xenial lxc launch xenial postgres lxc exec postgres bash sudo apt install postgresql eventually open network for remote connections listen_addresses = '*'

redis

Anonymous (anonymous@undisclosed.example.com) — 2017-11-07T12:44:32+00:00

redis * from sql to redis * from mysql to redis string type string: store a value [integer, string, ...] belong a key [string] SET connections 10 INCR connections => 11 INCR connections => 12 DEL connections INCR connections => 1 expiring key SET resource:lock "Redis Demo" EXPIRE resource:lock 120

xenial

Anonymous (anonymous@undisclosed.example.com) — 2017-08-05T16:35:10+00:00

Xenial bootable USB Create usb bootable from iso cp xenial.iso xenial-copy.iso isohybrid xenial-copy.iso dd if=xenial-copy.iso of=/dev/sd? ssh See Re-enable ssh-dss key in /etc/ssh/sshd_config PubkeyAcceptedKeyTypes=+ssh-dss ~/.ssh/config

motorizzazione

Anonymous (anonymous@undisclosed.example.com) — 2019-03-19T14:52:10+00:00

Motorizzazione Motorizzazione uses cisco anyconnect VPN, available in linux with openconnect. credenziali Credenziali VPN: For Municipalities (Local Police) username begins: COM.xxxxxxxxxxxx For Police, the State Police and other police forces VPN credentials are not provided. Therefore we must try to request them to CED Interagency Ministry.

samoklava

Anonymous (anonymous@undisclosed.example.com) — 2022-02-23T06:32:08+00:00

Samoklava * github * diodless * my fork update my fork git fetch upstream git rebase upstream/main todo points: zones: matrix: anchor: rotate: 5 columns: pinky: ring: rotate: -5 origin: [-12, -19] stagger: 12 middle: stagger: 5 index: stagger: -6 inner: stagger: -2 rows: bottom: home: top: thumbfan: anchor: ref: m…

orto

Anonymous (anonymous@undisclosed.example.com) — 2016-04-30T07:55:30+00:00

Orto orto sinergicoconsociazioni utili di ortaggi Pompe * pompa 12v

oruxmaps

Anonymous (anonymous@undisclosed.example.com) — 2022-06-19T07:02:58+00:00

Oruxmaps download app Scaricare e installare apk versione 7.5.9 oppure acquistare la versione oruxmaps nel playstore mappe offline Selezionare dal sito openandromaps europe la sezione Alps Ost e cliccare su Oruxmaps Il download dovrebbe partire in automatico e durare qualche minuto (600MB !!)

chiquitita

Anonymous (anonymous@undisclosed.example.com) — 2016-01-05T17:46:52+00:00

Chiquitita - Abba A Asus4 A Chiquitita, tell me what s wrong E Esus4 E You re enchained by your own sorrow E D E E7 A Asus4 A In your eyes there is no hope for tomorrow A Asus4 A How I hate to see you like this A E Esus4 E There is no way you can deny it E D E E7 A Asus4 A I can see that you re oh so sad, so quiet A …

mdm

Anonymous (anonymous@undisclosed.example.com) — 2022-03-10T08:19:01+00:00

mobile device management (MDM) gestione app * scaricare apk o xapk da caricare su gianomdm il package assegnare il package al gruppo di test, ad esempio 'supervigili' successivamente, dopo i test, assegnare il package al gruppo 'vigili'

ceph-on-k0s

Anonymous (anonymous@undisclosed.example.com) — 2024-10-31T07:46:44+00:00

ceph come storage backend Su ceph creare un pool per kubernetes (che ho chiamato appunto kubernetes) ubuntu@joint-mongoose:~$ helm repo add ceph-csi https://ceph.github.io/csi-charts ubuntu@joint-mongoose:~$ helm show values ceph-csi/ceph-csi-rbd > ceph-csi-helm.yaml

cordova

Anonymous (anonymous@undisclosed.example.com) — 2015-02-19T16:10:57+00:00

Cordova Install Install nodejs and npm sudo apt-get install nodejs npm Install cordova sudo npm install -g cordova cordova need node and ubuntu install nodejs sudo ln -s /usr/bin/nodejs /usr/local/bin/node install cordova-browser from git to have linux support

cvat

Anonymous (anonymous@undisclosed.example.com) — 2020-09-09T10:04:29+00:00

CVAT Istruzioni per l' accesso al programma: * Andare con chrome su * luca * entrare come utente “luca” e password “lucaguiotto” * cliccare su “ocr-11” → Jobs (quando finito passare a ocr-14) * toli * entrare come utente “toli” e password “tolitoli”

dac

Anonymous (anonymous@undisclosed.example.com) — 2016-07-27T18:00:30+00:00

DAC * interesting aplay -v -D plughw:1,0 test192.wav aplay -l [-L] flac -d 01-Wednesday\ Night\ Prayer\ Meeting.flac -c | aplay --device=hw:1,0 cat /proc/asound/card1/pcm0p/sub0/* pacmd list-sinks pactl list short sinks for card in `aplay -L | grep "CARD=DAC"`; do echo ./hw_params $card; ./hw_params $card | grep Sample; sleep 1; done

dns

Anonymous (anonymous@undisclosed.example.com) — 2021-09-30T10:10:28+00:00

DNS certbot integration * generate tsig key tsig-keygen -a HMAC-SHA512 galileo-tsig-key enable rfc2136 updates on domain in /etc/bind/named.conf.local zone "nawigare.it" { ...... // this is for certbot check-names warn; update-policy { grant galileo-tsig-key name _acme-challenge.nawigare.it. txt; }; };

juju

Anonymous (anonymous@undisclosed.example.com) — 2020-07-30T14:11:56+00:00

JUJU manual cloud juju bootstrap testcloud manual/10.0.1.21 --upload-tools \ --config default-series=xenial \ --config apt-http-proxy="http://10.0.1.1:8000" \ --config agent-stream=devel # Controllare con juju model-config default-series # ed eventualmente correggere con juju model-config default-series=xenial

kyria

Anonymous (anonymous@undisclosed.example.com) — 2020-10-31T20:01:41+00:00

Kyria * my layout * schema Base Layer: QWERTY ,-------------------------------------------. ,-------------------------------------------. |RAIS/ESC| Q | W | E | R | T | | Y | U | I | O | P | | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| |Ctrl/BS | A | S | D | F | G | | H | …

mopidy

Anonymous (anonymous@undisclosed.example.com) — 2017-02-11T10:48:46+00:00

Mopidy Install prereq sudo apt install -y gstreamer1.0-plugins-bad sudo apt install -y libasound2-dev apt wget -q -O - https://apt.mopidy.com/mopidy.gpg | sudo apt-key add - sudo wget -q -O /etc/apt/sources.list.d/mopidy.list https://apt.mopidy.com/jessie.list sudo apt-get update sudo apt-get install mopidy sudo apt-get install mopidy-spotify sudo apt install mopidy-alsamixer sudo pip install Mopidy-WebSettings sudo apt install mopidy-local-sqlite sudo pip install Mopidy-TuneIn sudo sy…

test

Anonymous (anonymous@undisclosed.example.com) — 2021-04-21T06:32:00+00:00

Test Il test consiste nell'implementare un dialogo con protocollo http per l'interrogazione di un semplice web service. Sostanzialmente va realizzato in programmino in bash, python, nodejs o java con un punteggio di 10 punti. Il candidato ottiene 10 punti per ogni programma realizzato e funzionante, per un

zfs

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T10:22:24+00:00

zfs libvirt ZFS apt install zfsutils-linux sudo zfs list create filesystem 'lab' on 'LXD' pool sudo zfs create LXD/lab sudo zfs set mountpoint=/lab LXD/lab sudo zfs destroy LXD/lab create pool Pool can be created on disk or partition. In case of partition this is an example

dokuwiki

Anonymous (anonymous@undisclosed.example.com) — 2021-03-04T17:35:19+00:00

DokuWiki wiki:dokuwiki DokuWiki is a simple to use and highly versatile Open Source wiki software that doesn't require a database. It is loved by users for its clean and readable syntax. The ease of maintenance, backup and integration makes it an administrator's favorite. Built in

broadlink

Anonymous (anonymous@undisclosed.example.com) — 2019-07-13T12:26:56+00:00

broadlink wget https://raw.githubusercontent.com/mjg59/python-broadlink/master/cli/broadlink_cli wget https://raw.githubusercontent.com/mjg59/python-broadlink/master/cli/broadlink_discovery chmod +x broadlink_cli broadlink_discovery ./broadlink_discovery echo "0x2787 192.168.2.28 a126f434ea34" > broadlink

esp8266

Anonymous (anonymous@undisclosed.example.com) — 2018-01-21T08:43:46+00:00

esp8266

hw

Anonymous (anonymous@undisclosed.example.com) — 2018-04-24T07:21:45+00:00

Hardware Rele * sonos 4 ch RF and wifi Energy * electrical power magnetic 2 channels Allarme Sirena * Strobe Sound Alarm Vision Security battery powered Z-Wave Plus Controller Controller zwave * Mini controller USB Z-Wave plus Contrroller IR (360°) * WIFI Universal ir Broadlink Video sorveglianza videocamera indoor * ip cam wireless indoor videocamera(outdoor) * ip cam wireless outdoor ibeacon Install app BeaconSET. Set params and save with password=minew123

seamless

Anonymous (anonymous@undisclosed.example.com) — 2015-09-17T12:52:02+00:00

Seamless Windows RDP RemoteAPP Windows remote (guest) * reference * Activate remote connections * Install dot net runtime * Install remoteapptool * Activate allowlist for remoteapps with this regedit file


Windows Registry Editor Version 5.00


[HKEYLOCAL



virtualization
Anonymous (anonymous@undisclosed.example.com) — 2020-05-20T18:40:00+00:00
Virtualization

Virtualbox

	* Use virtio network driver
	* Use SATA driver for storage (no virtio available)
	* Use host only network and assign static IP to guest
	* In “User Interface” hide minitoolbar
	*  Add printers with address below and with generic MS Publisher Imagesetter driver


docs
Anonymous (anonymous@undisclosed.example.com) — 2017-05-04T15:45:54+00:00
WAMP

Concepts

A Crossbar.io node is a single instance of the Crossbar.io software running in a specific node directory

There are two types of processes running within a Crossbar.io node:

	*  one process controller
	*  multiple workers

Workers:


bootanimation
Anonymous (anonymous@undisclosed.example.com) — 2015-02-27T16:50:05+00:00
Android bootanimation


cd /lab/radxa/bootanimation
make

make upload


Copy bootanimation.zip into /lab/raxda*common/system/media

desc.txt


512 256 30
p 1 0 part0
p 0 0 part1


	* '523' is the width of the animation
	* '256' is the height of the animation


mssql
Anonymous (anonymous@undisclosed.example.com) — 2016-08-12T08:50:39+00:00
MSSQL

	* 
	* 

Install unixodbc version > 2.3.0


sudo apt-get remove libodbc1 unixodbc unixodbc-dev

wget ftp://ftp.unixodbc.org/pub/unixODBC/unixODBC-2.3.4.tar.gz
tar zxvf unixODBC-2.3.4.tar.gz 
cd unixODBC-2.3.4/
./configure --enable-gui=no --enable-drivers=no --enable-iconv --with-iconv-char-enc=U…


minecraft
Anonymous (anonymous@undisclosed.example.com) — 2017-08-19T07:53:51+00:00
Minecraft

Experiments

	* 

connection


from mcpi.minecraft import Minecraft
from mcpi import block

mc = Minecraft.create(address="192.168.2.35")


say “Hello World”


mc.postToChat("Hello world")


get position 


x, y, z = mc.player.getPos()


minetest
Anonymous (anonymous@undisclosed.example.com) — 2017-08-18T20:28:15+00:00
Minetest

	* 

client


sudo apt install minetest


connect to cubo

commands:

	*  /home (and related /sethome)
	*  /teleport ,,
	*  /teleport 

keys:

	*  F5 	Shows player coordinates 	Shows server stats
	*  F7 	Changes camera view 	Cycles through camera views


panda3d
Anonymous (anonymous@undisclosed.example.com) — 2015-04-11T07:27:02+00:00
Panda3D

Install from sources


sudo apt-get install build-essential bison flex python-dev \
 freeglut3-dev libglu1-mesa-dev libfreetype6-dev libosmesa6-dev \
 libgtk2.0-dev libpng12-dev libjpeg-dev libtiff5-dev libxft-dev libssl-dev \
 libeigen3-dev libswscale-dev fftw-dev libgles1-mesa-dev libgles2-mesa-dev \
 libgegl-dev libode-dev libopenal-dev  libxxf86dga-dev \
 libavcodec-dev libavdevice-dev libavfilter-dev libavformat-dev \
 libavifile-0.7-dev libavutil-dev

# libbullet-dev


install
Anonymous (anonymous@undisclosed.example.com) — 2018-06-13T07:06:49+00:00
opencv install

android studio

integrate opencv in android studio project

linux

prereq: ubuntu 16:04 or 18:04


sudo apt-get install -y build-essential cmake
# GUI (if you want to use GTK instead of Qt, replace 'qt5-default' with 'libgtkglext1-dev' and remove '-DWITH_QT=ON' option in CMake):
sudo apt-get install -y libvtk6-dev libgtkglext1-dev 

# GUI qt
# sudo apt install -y qt5-default

# Media I/O:
sudo apt-get install -y zlib1g-dev libjpeg-dev libwebp-dev libpng-dev libtiff5-dev libjasper…


gpio
Anonymous (anonymous@undisclosed.example.com) — 2015-02-21T09:40:53+00:00
GPIO on Radxa

	*  Headers schema
	*  Android APP that read GPIO

Power on blue led


echo default-on > /sys/class/leds/blue/trigger


Power off


echo none > /sys/class/leds/blue/trigger


Header J8
1234567 OUT89 IN101112namenpinheader0A7|167|7|J8|
|0B11699J8PWM228511J8
Input on pin 169 (GPIO0_B1) (pin n°9 su J8)


monitor
Anonymous (anonymous@undisclosed.example.com) — 2016-05-13T12:33:50+00:00
Sound Monitor

PC

Prerequisite


sudo apt-get install netdiscover rrdtool cifs-utils

# generate ssh keys
ssh-keygen


gedit preferences -> editor


tab width: 4
check insert spaces instead of tabs


Discover RADXA


sudo netdiscover
...
192.168.2.44    ac:a2:13:42:1c:14 Shenzhen Bilian electronic CO.,LTD
...


18.04
Anonymous (anonymous@undisclosed.example.com) — 2018-08-21T05:01:47+00:00
18.04 bionic

ZFS (guest)

From running ZFS ubuntu on guest install newer system in new ZFS fs



sudo su
DISTRO=bionic
apt install -y debootstrap
zfs create -o canmount=noauto -o mountpoint=/$DISTRO rpool/ROOT/$DISTRO
zfs mount rpool/ROOT/$DISTRO
mount -o remount,dev /$DISTRO
debootstrap $DISTRO /$DISTRO
mount --rbind /dev  /$DISTRO/dev
mount --rbind /proc /$DISTRO/proc
mount --rbind /sys  /$DISTRO/sys
chroot /$DISTRO /bin/bash --login


pptp
Anonymous (anonymous@undisclosed.example.com) — 2017-01-13T11:07:20+00:00
pptp

linux client


apt install pptp-linux 



lock noauth nobsdcomp nodeflate



 PPTP  *



pty "pptp 185.91.188.97 --nolaunchpppd"
name 
remotename PPTP
require-mppe-128
file /etc/ppp/options.pptp
ipparam galileo


test


docker
Anonymous (anonymous@undisclosed.example.com) — 2023-04-19T06:08:36+00:00
docker

install


apt-get install -y ca-certificates curl gnupg lsb-release
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \
  $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
apt update
apt-get install -y docker-ce docker-ce-cli container…