Search
You can find the results of your search below.
Fulltext results:
- blender @tips
- ====== * SHIFT z: switch wireframe and object mode * f: fill faces or edges between edges or verte... s,vertex: edit -> preferences -> keymap -> search mode * select mode toggle: ALT+1 * select mode toggle: ALT+2 * select mode toggle: ALT+3 ===== fix boolean opera
- airos @tips
- wireless": { "essid": "lessinianet.net", "mode": "sta-ptmp", "compat_11n": 0, "hide_essi... 661952, "netrole": "bridge", "mode": "ap-ptmp", "compat_11n": 1, ... "duplex": false } } ], "provmode": {}, "ntpclient": {}, "unms": { "status"... 0331084, "cpubusy": 3895687 }, "wireless": { "mode": "sta", "essid": "lessinianet.net", "hide_essi
- jibri @tips
- eck 10000 log global option httplog mode http option dontlognull frontend ft_http ... f http-response set-header X-XSS-Protection 1;mode=block http-response set-header Referrer-Polic... r-when-downgrade backend bk_http_default mode http server s1 94.230.76.84:8080 check id 1 backend bk_http mode http server s2 localhost:8080 check id 2
- tmux @tips
- dows * ctrl+a d: detach * ctrl+a PGUP: scroll mode ===== sessions ===== list <code bash> tmux ls <... our166 #orange # clock set-window-option -g clock-mode-colour green #green set -g status-interval 1 se... vity on set -g visual-activity on # Vi copypaste mode set-window-option -g mode-keys vi bind-key -t vi-copy 'v' begin-selection bind-key -t vi-copy 'y' copy-
- kuu @tips:hw
- </code> run 'systemd-hwdb update' ===== tablet mode ===== * install tablet-mode and configure * add user to tablet group * use tablet-mode desktop to switch mode /etc/tablet-mode.json <code> { "tablet": [ "/dev/input/by-path/plat
- 3dprinter @projects
- ing:3547428|temperature tower]] * set combing mode to off <WRAP important 50%> z offset: subtract 0... ==== * Initial Layer Speed: 20mm/s * Combing mode: not in skin * Maximum Comb Distance with No Re... imum Extrusion Distance Window: 10mm. * Combing Mode: ON and set to “Within Infill” (no stringing). ... to override G91 and put the E axis into absolute mode independent of the other axes. G92 E0; set absolu
- ssl @tips
- gin for Let's Encrypt. I could not get standalone mode to work. my A records look like .. <code> www01... NX server blocks now run lets encrypt in webroot mode (you will need to standup a web server on your co... .com via NGINX bosh! 2 tips 1 - to use webroot mode you will need to have a basic web server running ... a specified directory 2 - do not use standalone mode, i could not get it to work 3 - this solution si
- gpio @tips:rasberry
- _Circuits|interface circuits]] GPIO numbers (BCM mode) {{:tips:rasberry:gpio-numbers-pi2.png|}} physical number (BOARD mode) {{:tips:rasberry:physical-pin-numbers.png|}} test pin 17 <code> gpio -g mode 17 out gpio -g write 17 1 sleep 2 gpio -g write 1... .GPIO as GPIO import time GPIO.cleanup() GPIO.setmode(GPIO.BOARD) channel=11 GPIO.setup(channel, GPIO.
- gnss @tips
- RY ubxtool -e NMEA </code> get current dynamic mode <code> ubxtool -p CFG-NAV5 ... dynModel (Portabl... 1546", ATTRS{idProduct}=="01a9", SYMLINK+="gps0", MODE="0666" ATTRS{idVendor}=="1546", ATTRS{idProduct}=... /etc/default/gpsd> START_DAEMON="false" # binary mode for ublox GPSD_OPTIONS="-b" DEVICES="" USBAUTO="t
- zigbee @projects:iotaiuto
- een reset. This also puts the device into pairing mode. ==== Remote control ==== Factory reset by pres... een reset. This also puts the device into pairing mode. ==== Lamp ==== Factory reset by powering on 6 t... een reset. This also puts the device into pairing mode. ===== LIDL ===== ==== Lamp ==== Factory rese
- kinectv2 @tips:sensors
- ATTR{idVendor}=="045e", ATTR{idProduct}=="02c4", MODE="0666" SUBSYSTEM=="usb", ATTR{idVendor}=="045e", ATTR{idProduct}=="02d8", MODE="0666" SUBSYSTEM=="usb", ATTR{idVendor}=="045e", ATTR{idProduct}=="02d9", MODE="0666" </code> <code bash> sudo udevadm control
- orin
- op udisks2.service </code> put board in recovery mode <code bash> lsusb | grep 955 Bus 001 Device 007: ... vkit-16gb internal </code> put board in recovery mode flash <code bash> sudo ./tools/kernel_flash/l4t_
- qemu
- hine-and-save-to-a-local-disk ==understanding aio mode == * https://specs.openstack.org/openstack/nova-specs/specs/mitaka/implemented/libvirt-aio-mode.html * https://blog.programster.org/zfs-record-
- atom @tips
- t verified <code> atom-beautify \ atom-overtype-mode \ file-icons \ color-picker \ navigation-histo... jump to previous bookmarks * shit-enter: jumpy mode * ctrl-click: multi cursor * ctrl k → spl