Search

Fulltext results:

3dprinter

4 Hits, Last modified: 3 years ago

ing:3547428|temperature tower]] * set combing mode to off <WRAP important 50%> z offset: subtract 0... ==== * Initial Layer Speed: 20mm/s * Combing mode: not in skin * Maximum Comb Distance with No Re... imum Extrusion Distance Window: 10mm. * Combing Mode: ON and set to “Within Infill” (no stringing). ... to override G91 and put the E axis into absolute mode independent of the other axes. G92 E0; set absolu

zigbee @projects:iotaiuto

3 Hits, Last modified: 3 years ago

een reset. This also puts the device into pairing mode. ==== Remote control ==== Factory reset by pres... een reset. This also puts the device into pairing mode. ==== Lamp ==== Factory reset by powering on 6 t... een reset. This also puts the device into pairing mode. ===== LIDL ===== ==== Lamp ==== Factory rese

iotaiuto @projects:internetofthings

2 Hits, Last modified: 4 years ago

twork password (if secured), and set the security mode # 1.6 Security mode options are (0 = none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2) # 2. la conf

iidc @projects:zibaldone:electronic

2 Hits, Last modified: 3 years ago

nt grey SUBSYSTEM=="usb", ATTR{idVendor}=="1e10", MODE:="0666", TAG+="uaccess" # Basler SUBSYSTEM=="usb", ATTR{idVendor}=="2676", MODE:="0666", TAG+="uaccess", TAG+="udev-acl" </code>

turbolevo @projects:zibaldone:electronic

2 Hits, Last modified: 3 years ago

643320) can0 454#035A0B5A28005A motor is in trail mode (1617469276.643764) can0 300#035A0B5A28005A </cod... == * 454#03**A5**0B5A1E0023 walk button in eco mode <code> ... bla bla (1616830448.882233) can0 **4

esp32 @projects:internetofthings

1 Hits, Last modified: 3 years ago

3x SPI * 2x I2S * 2x DAC * 2x I2C * Sleep Mode Consumption: 5 μA * Integrated sensors * Hall

esphome @projects:internetofthings

1 Hits, Last modified: 3 years ago

id: beacon1 script: - id: ble_off_script mode: restart then: - binary_sensor.template

homeassistant @projects:internetofthings

1 Hits, Last modified: 2 years ago

nce="1" index="0" label="Operating State" units=" mode" value="Idle" /> </CommandClass> <CommandClas

micropython @projects:internetofthings

1 Hits, Last modified: 6 years ago

rt /dev/ttyUSB0 --baud 115200 write_flash --flash_mode dout --verify --flash_size=detect -fm dio 0 esp82

vscode @projects:zibaldone

1 Hits, Last modified: 11 months ago

with multi cursor * click+OPTION: multi cursor mode * ctrl-shit-p: format code * ctrl-F2: add cur