Fulltext results:
- 11-ns-network @projects:openstack-ansible
- AT (senza floating IP) passa ancora attraverso il network node centralizzato. Questa è una lista di serviz... on L3 Agent (Compute Nodes) * Neutron L3 Agent (Network Node/Controller) * Neutron Metadata Agent * N... il traffico senza Floating IP è centralizzato sul network node * Metering Agent: Il servizio di metering ... rare e misurare l'utilizzo della banda per tenant/network ==== Controller Node ==== Il controller node in r
- lxd @tips
- fault root disk path=/ pool=zfspool # initialize network sudo lxd init </code> Because group membership i... sudo apt install apt-cacher-ng PROXY=$( lxc network show lxdbr0 | sed -n 's/\s\+ipv4.address: \([0-9\... Proxy "http://10.106.191.1:3142"; </file> ===== network ===== <code> lxc network create br0 lxc network show br0 lxc network edit br0 </code> static IP containe
- galileo @tips:vpn
- alileo.org * username e password <code> yay -S networkmanager-l2tp networkmanager-strongswan </code> aggiungere vpn L2TP {{ :tips:vpn:vpn01.png?400 |}} {{ :ti... 00 |}} ====== pptp manual ====== <file ini /etc/NetworkManager/system-connections/galileo.nmconnection> [... r-auth-type=password service-type=org.freedesktop.NetworkManager.l2tp [vpn-secrets] password=xxx [ipv4] d
- univr @tips:vpn
- ===== ubuntu ====== <code bash> sudo apt install network-manager-vpnc network-manager-vpnc-gnome </code> ====== arch ====== <code> paru networkmanager-vpnc </code> ====== network manager ====== <code> yay -S networkmanager-vpnc </code> add VPN ci
- docker @projects:zibaldone:linux
- ker buildx create --use --name $NAME --driver-opt network=host </code> build from a Dockerfile and push to... ult-addr-pool-mask-length 26 </code> convert web network scoped "local" to swarm scope <code> docker network rm web docker network create -d overlay web </code> deploy compose as swarm <code> cd ~/traefik docker st
- server @projects:livenet
- g** <code>apt install isc-dhcp-server </code> **network config ** nano /etc/netplan/01-netcfg.yaml <code> # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens3: dhcp4: no addresses: [10.1.22.2/24]
- postgres @tips:db
- o apt install postgresql </code> eventually open network for remote connections <file ini /etc/postgresql/... set static IP on containers <code> /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts ├── pgmodeler └── postgres </code> <code> cat > /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts/pgmodeler <<EOF 00:16:3e:9d... d2,10.8.120.205,pgmodeler EOF cat > /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts/postgres <<EOF 00:16:3e:ce:
- iotaiuto @projects:internetofthings
- ervice [Unit] Description=Home Assistant After=network.target [Service] Type=simple User=pi ExecStart=... arnings, which are a common false # alarm on WiFi networks. This option preserves the security of # the ... rov. # 1.5 Run setup() and provide your ssid, network password (if secured), and set the security mode ... o import broadlink broadlink.setup('myssid', 'mynetworkpass', 3) # 3. poi si preleveranno dal repositor
- micropython @projects:internetofthings
- ll picocom picocom /dev/ttyUSB0 -b115200 </code> network wifi STA <code> import network sta_if = network.WLAN(network.STA_IF) sta_if.active(True) sta_if.connect('<your ESSID>', '<your password>') sta_if.ifconfig
- virtualization @projects:livenet
- on ====== ===== Virtualbox ===== * Use virtio network driver * Use SATA driver for storage (no virtio available) * Use host only network and assign static IP to guest * In "User Interf... stip>:631/printers/<printername> </code> Enable network for guest if host is connected to work with eth0
- 00-setup-univr @projects:openstack-ansible
- anagement | OS-MGT | 1109 | Ansible network | 10.224.3.0/24 | | api | OS-INTERNAL | 1112 | Management Network | 10.224.10.0/24 | | tunnel | OS-ADMIN | 1113 | Tunnel (VXLAN network) | 10.224.12.0/24 | | ceph-storage
- 04-connessione-ceph @projects:openstack-ansible
- ph_client_uuid }}" nova_libvirt_disk_cachemodes: "network=writeback" nova_libvirt_hw_disk_discard: unmap no... cephx auth_client_required: cephx public_network: "10.224.14.0/24" cluster_network: "10.224.16.0/24" # Funzionalità RBD ottimizzate per Squid
- zfs-on-root @tips:ubuntu
- -hwe-16.04 xserver-xorg-hwe-16.04 </code> enable network manager on all interfaces (see [[https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1638842|this]] <code> touch /etc/NetworkManager/conf.d/10-globally-managed-devices.conf </cod
- orin
- der/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nx-devkit-16gb internal </code> ... der/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 jetson-orin-nx-devkit-16gb internal </code>
- install @tips:archlinux
- > ==== Gnome ==== <code> pacman -S gnome gpaste network-manager-applet systemctl enable NetworkManager.service systemctl enable gdm </code> nvidia <code> pacman
