Fulltext results:
- 11-ns-network @projects:openstack-ansible
- AT (senza floating IP) passa ancora attraverso il network node centralizzato. Questa è una lista di serviz... on L3 Agent (Compute Nodes) * Neutron L3 Agent (Network Node/Controller) * Neutron Metadata Agent * N... il traffico senza Floating IP è centralizzato sul network node * Metering Agent: Il servizio di metering ... rare e misurare l'utilizzo della banda per tenant/network ==== Controller Node ==== Il controller node in r
- docker @projects:zibaldone:linux
- ker buildx create --use --name $NAME --driver-opt network=host </code> build from a Dockerfile and push to... ult-addr-pool-mask-length 26 </code> convert web network scoped "local" to swarm scope <code> docker network rm web docker network create -d overlay web </code> deploy compose as swarm <code> cd ~/traefik docker st
- micropython @projects:internetofthings
- ll picocom picocom /dev/ttyUSB0 -b115200 </code> network wifi STA <code> import network sta_if = network.WLAN(network.STA_IF) sta_if.active(True) sta_if.connect('<your ESSID>', '<your password>') sta_if.ifconfig
- server @projects:livenet
- g** <code>apt install isc-dhcp-server </code> **network config ** nano /etc/netplan/01-netcfg.yaml <code> # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ... , "Packet from PXE or LIVENET client"); } shared-network "clients" { subnet 10.1.22.0 netmask 255.255.25
- virtualization @projects:livenet
- on ====== ===== Virtualbox ===== * Use virtio network driver * Use SATA driver for storage (no virtio available) * Use host only network and assign static IP to guest * In "User Interf... stip>:631/printers/<printername> </code> Enable network for guest if host is connected to work with eth0
- 00-setup-univr @projects:openstack-ansible
- anagement | OS-MGT | 1109 | Ansible network | 10.224.3.0/24 | | api | OS-INTERNAL | 1112 | Management Network | 10.224.10.0/24 | | tunnel | OS-ADMIN | 1113 | Tunnel (VXLAN network) | 10.224.12.0/24 | | ceph-storage
- 04-connessione-ceph @projects:openstack-ansible
- ph_client_uuid }}" nova_libvirt_disk_cachemodes: "network=writeback" nova_libvirt_hw_disk_discard: unmap no... cephx auth_client_required: cephx public_network: "10.224.14.0/24" cluster_network: "10.224.16.0/24" # Funzionalità RBD ottimizzate per Squid
- iotaiuto @projects:internetofthings
- ervice [Unit] Description=Home Assistant After=network.target [Service] Type=simple User=pi ExecStart=... rov. # 1.5 Run setup() and provide your ssid, network password (if secured), and set the security mode
- homeassistant @projects:internetofthings
- s.service> [Unit] Description=homeassistant After=network.target [Service] Type=simple User=pi ExecStart=/
- doorbell @projects:iotaiuto
- TSP con VLC:\\ <nowiki> VLC menu -> Media -> Open network stream -> rtsp://indirizzo_ip_esp:8675 </nowiki>
- mycroft @projects:iotaiuto
- o al file le credenziali della rete wifi: <code> network={ ssid="nome rete" psk="password" } </cod
- zigbee @projects:iotaiuto
- ====== ZHA zigbee ====== ===== Factory reset network ===== Remove ZHA integration, delete zigbee.db and
- scipiodev @projects:livenet
- sharenfs=ro rpool/livenet/backups </code> ====== network ====== <code> virsh net-edit default </code> <c
- 03-ceph @projects:openstack-ansible
- .16.0/26'' <code> ceph config set global cluster_network 10.224.16.0/26 </code> e aggiungere gli host deg
- 10-storage-backend @projects:openstack-ansible
- migration_inbound_addr = 10.224.10.34 hw_disk_discard = unmap disk_cachemodes = network=writeback </code>
