Fulltext results:
- turbolevo @projects:zibaldone:electronic
- bus/|example ESP32 project]] * transreveiver TJA1050T: [[https://www.mouser.it/datasheet/2/302/TJA1050-1127967.pdf|datasheet]] * {{:tips:can-signalin... = {{:tips:schema.png?800|}} {{:tips:mosfet.png?100|}} {{:tips:pnp.png?100|}} BOM: * [[https://lcsc.com/product-detail/DC-DC-Converters_UMW-Youtai-S
- alhambra @music
- -8-8-8---7-7-7----7-7-7-| ------------------------10----------------8----------------| ---------------... ---------------------------------| ---------------10----------------10---------------10-------| --8--------------------------------------------------------| ---------------
- lxd @tips
- pt/apt.conf.d/proxy> Acquire::http::Proxy "http://10.106.191.1:3142"; </file> ===== network ===== <code> lxc network create br0 lxc network show br0 lx... lxc config device set $istance eth0 ipv4.address 10.99.10.42 lxc start $istance </code> ===== servers ===== prepare lxd server <code> # bind to port 844
- airos @tips
- P ===== <code> snmpwalk -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifDescr IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifD... 5 = STRING: ath0 IF-MIB::ifDescr.6 = STRING: eth0.10 IF-MIB::ifDescr.7 = STRING: br0 </code> <code> snmpget -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifPhysAddress.4
- 3dprinter @projects
- n skin * Maximum Comb Distance with No Retract: 10mm * Initial Layer Line Width: 140% PLA: * z-... * first layer: 250 * other layer: 240 * bed: 100 * z-hop: 0.6 or 0 * adhesion: brim * speed... ture = =max(-273.15, material_print_temperature - 10) material_print_temperature = 245 material_print_... raft_margin = 5 retraction_combing_max_distance = 10 retraction_hop = 0.6 retraction_hop_enabled = Tru
- gstreamer @tips
- ware decode <code> F=videos/traffico01-1152x720-1610kb.mkv gst-launch-1.0 filesrc location=$F ! matros... Size: Discrete 640x480 Interval: Discrete 0.010s (100.000 fps) Interval: Discrete 0.011s (90.000 fps) Interval: Discrete 0.017s (60.000 fps) ... ete 0.008s (120.000 fps) Interval: Discrete 0.010s (100.000 fps) Interval: Discrete 0.017s (60.0
- gnss @tips
- r.git sourcetable.dat <code> CAS;rtcm-ntrip.org;2101;NtripInfoCaster;BKG;0;DEU;50.12;8.69;http://www.... e;Verona;RTCM3;none;1;none;TEST;ITA;45.4935250;11.1068889;421;0;receiver5;none;B;N;3600;none </code> ... urn source table <code> curl http://192.168.2.50:2101 </code> ==== ntrip base station ==== configur... tyACM0:115200#stq' -out 'ntrips://:mev@localhost:2101/castagne#rtcm2' -p 45.4935250 011.1068889 421 -m
- 03-ceph @projects:openstack-ansible
- lo standalone ==== Bootstrap cluster ==== Se ''10.224.14.11'' è l'ip della classe ''front'' nella m... di bootstrap: <code> cephadm bootstrap --mon-ip 10.224.14.11 </code> cephadm creerà dei container d... T ADDR LABELS STATUS os-ctrl-1 10.224.14.11 _admin # ceph orch host add os-ctrl-2 10.224.14.12 Added host 'os-ctrl-2' with addr '10.22
- iidc @projects:zibaldone:electronic
- ====== DCAM IIDC camera ====== <code> [ 1161.810809] usb 10-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1161.874950] usb 10-2: New USB device found, idVendor=1e10, idProduct=3300, bcdDevice= 0.00 [ 1161.874953] usb 10-2: New
- server @projects:livenet
- = ** HW**: 2 nic device **OS**: Ubuntu server 17.10 <code>apt install bash debootstrap schroot sysli... nets: ens3: dhcp4: no addresses: [10.1.22.2/24] gateway4: 192.168.122.1 na... default <code> default menu.c32 prompt 0 #timeout 100 menu title PXE Special Boot Menu MENU AUTOBOOT ... l append initrd=/bionic/initrd ro livenet_root=10.1.22.2:/zfsp_livenet/images/bionic livenet_profil
- licoli @madmax
- tà di licoli ===== * Per una lievitazione di 8-10 ore a 25°C occorre il 30% in peso di licoli rispe... decidiamo la velocità di lievitazione (di solito 10 per una lievitazione di 12h a 26°C) maxima <code... na||acqua||sale|| ||3||660||35||35||35||348||208||10|| ||6||1320||70||70||70||696||416||20|| ||10||2200||116||116||116||1159||693||33|| ||16||3520||186||1
- 00-setup-univr @projects:openstack-ansible
- ^ | trunk-ext | OS-TRAFFIC | 1110 | rete esterna (Nord-Sud) | 10.224.2.0/24 | | provisioning | OS-PXE | 1100 | Bootstrap PXE (provisioning macchine)| 10.224.0.0/24 | | management | OS-MGT | 1109
- proxmox @tips
- D --ipconfig1 ip=dhcp # qm set 203 --ipconfig0 ip=10.1.109.203/24,gw=10.1.109.1 # (Optional but recommended) Set a DNS server qm set $VMID --nameserver 8.8.8.8 # convert v
- zfs @tips
- End (sector) Size Code Name 1 1026048 74426367 35.0 GiB 8300 Linux filesystem 2 2048 1026047 500.0 MiB EF02 3 74426368 76474367 1000.0 MiB 8200 4 76474368 976756... -create-as --pool zfspool --name maas2 --capacity 10G </code> destroy volume <code> virsh vol-delete
- pizza @madmax
- enti per 1.68Kg di pasta (4 palle da 420g): * **1040 g** farina di grano tenero tosano * **610 g** di acqua senza cloro a temperatura ambiente * **3... Ingredienti per 1.8Kg di pasta (7 palline): * **1000 g** farina di grano tenero "003" del mulino sartori W380 {{:madmax:tipo002.jpg?direct&100|}} * **650 g** di acqua senza cloro a temperat
