Fulltext results:
- alhambra @music
- -8-8-8---7-7-7----7-7-7-| ------------------------10----------------8----------------| ---------------... ---------------------------------| ---------------10----------------10---------------10-------| --8--------------------------------------------------------| ---------------
- lxd @tips
- pt/apt.conf.d/proxy> Acquire::http::Proxy "http://10.106.191.1:3142"; </file> ===== network ===== <code> lxc network create br0 lxc network show br0 lx... lxc config device set $istance eth0 ipv4.address 10.99.10.42 lxc start $istance </code> ===== servers ===== prepare lxd server <code> # bind to port 844
- 03-ceph @projects:openstack-ansible
- lo standalone ==== Bootstrap cluster ==== Se ''10.224.14.11'' è l'ip della classe ''front'' nella m... di bootstrap: <code> cephadm bootstrap --mon-ip 10.224.14.11 </code> cephadm creerà dei container d... T ADDR LABELS STATUS os-ctrl-1 10.224.14.11 _admin # ceph orch host add os-ctrl-2 10.224.14.12 Added host 'os-ctrl-2' with addr '10.22
- server @projects:livenet
- = ** HW**: 2 nic device **OS**: Ubuntu server 17.10 <code>apt install bash debootstrap schroot sysli... nets: ens3: dhcp4: no addresses: [10.1.22.2/24] gateway4: 192.168.122.1 na... default <code> default menu.c32 prompt 0 #timeout 100 menu title PXE Special Boot Menu MENU AUTOBOOT ... l append initrd=/bionic/initrd ro livenet_root=10.1.22.2:/zfsp_livenet/images/bionic livenet_profil
- licoli @madmax
- tà di licoli ===== * Per una lievitazione di 8-10 ore a 25°C occorre il 30% in peso di licoli rispe... decidiamo la velocità di lievitazione (di solito 10 per una lievitazione di 12h a 26°C) maxima <code... na||acqua||sale|| ||3||660||35||35||35||348||208||10|| ||6||1320||70||70||70||696||416||20|| ||10||2200||116||116||116||1159||693||33|| ||16||3520||186||1
- airos @tips
- P ===== <code> snmpwalk -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifDescr IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifD... 5 = STRING: ath0 IF-MIB::ifDescr.6 = STRING: eth0.10 IF-MIB::ifDescr.7 = STRING: br0 </code> <code> snmpget -c lessinianet.snmp -v 1 10.210.12.249 IF-MIB::ifPhysAddress.4
- jupyterhub @tips
- to si pilota da interfaccia grafica o da [[http://10.45.206.67|console]] (admin/Euro....). <code> # laboratorio kubernetes * 10.45.206.67 rancher-console * 10.45.206.91 master-01 * 10.45.206.75 master-02 * 10.45.206.78 master-03 * 10.45.206.80 worker-01
- 04-connessione-ceph @projects:openstack-ansible
- ode> # === CONFIGURAZIONE CEPH === ceph_mons: - 10.224.14.11:6789 # Sostituisci con i tuoi IP - 10.224.14.12:6789 - 10.224.14.13:6789 # Genera UUID per i segreti # Usa: uuidgen per generare questo ... 3c04d-9308-11f0-9f0f-20040ff6d120" mon_host: "10.0.0.10:6789,10.0.0.11:6789,10.0.0.12:6789" au
- 00-setup-univr @projects:openstack-ansible
- ^ | trunk-ext | OS-TRAFFIC | 1110 | rete esterna (Nord-Sud) | 10.224.2.0/24 | | provisioning | OS-PXE | 1100 | Bootstrap PXE (provisioning macchine)| 10.224.0.0/24 | | management | OS-MGT | 1109
- openvpn @tips:vpn
- ip pool <code> /ip pool add name=ovpn-pool ranges=10.15.32.34-10.15.32.38 </code> profile and vpn user <code> /ppp profile add change-tcp-mss=default comment="" local-address=10.15.32.33 \ name="your_profile" only-one=default r... n/up.sh (chmod +x) <code> #!/bin/sh ip route add 10.90.0.0/16 via 10.15.32.33 </code> /etc/openvpn/a
- iotaiuto @projects:internetofthings
- el-b-plus/]] ==== SCHEDA MICRO SD (ALMENO CLASSE-10) ==== [[https://www.amazon.it/SanDisk-MicroSDHC-... n/up.sh (chmod +x) <code> #!/bin/sh ip route add 10.90.0.0/16 via 10.15.32.33 </code> /etc/openvpn/auth.cfg <code> username password </code> Start serv... icazione BROADLINK con versione di crittografia 0.10 (obbligatoria altrimenti # non funziona)
- iidc @projects:zibaldone:electronic
- ====== DCAM IIDC camera ====== <code> [ 1161.810809] usb 10-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1161.874950] usb 10-2: New USB device found, idVendor=1e10, idProduct=3300, bcdDevice= 0.00 [ 1161.874953] usb 10-2: New USB device strings: Mfr=1, Product=2, Seri
- 3dprinter @projects
- * first layer: 250 * other layer: 240 * bed: 100 * z-hop: 0.6 or 0 * adhesion: brim * speed... ture = =max(-273.15, material_print_temperature - 10) material_print_temperature = 245 material_print_... raft_margin = 5 retraction_combing_max_distance = 10 retraction_hop = 0.6 retraction_hop_enabled = Tru... eed_print_layer_0 = =speed_layer_0 speed_travel = 100 speed_travel_layer_0 = =speed_layer_0 * speed_tr
- ansible @tips
- ython_interpreter='/usr/bin/env python3' [nodes] 10.45.0.1 10.45.0.2 10.45.0.3 10.45.0.4 10.45.0.5 </file>
