Show pageOld revisionsBacklinksAdd to bookExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== ZHA zigbee ====== ===== Factory reset network ===== Remove ZHA integration, delete zigbee.db and restart hass ===== Ikea ===== ==== Motion Sensor ==== Factory reset by pressing the middle “link” button 4 times rapidly. A red LED should display on the front indicating it has been reset. This also puts the device into pairing mode. ==== Remote control ==== Factory reset by pressing the “link” button 4 times rapidly. A red LED should display on the front indicating it has been reset. This also puts the device into pairing mode. ==== Lamp ==== Factory reset by powering on 6 times ==== Motion Sensor remote sensor ==== Factory reset by pressing the “link” button 4 times rapidly. A red LED should display on the front indicating it has been reset. This also puts the device into pairing mode. ===== LIDL ===== ==== Lamp ==== Factory reset by powering on 4 times projects/iotaiuto/zigbee.txt Last modified: 2021/11/01 12:10by scipio