Fulltext results:
- server @projects:livenet
- g** <code>apt install isc-dhcp-server </code> **network config ** nano /etc/netplan/01-netcfg.yaml <code> # This file describes the network interfaces available on your system # For more info
- networknamespaces @tips:linux
- ====== Network Namespaces ====== ===== setup ===== install [[https://raw.githubusercontent.com/Lekensteyn/netns|netns]] helper <code> wget https://raw.githubusercontent.com/Lekensteyn/netns/master/netns -O /bin/netns chmod +x /bin/nets <
- lxd @tips
- fault root disk path=/ pool=zfspool # initialize network sudo lxd init </code> Because group membersh... sudo apt install apt-cacher-ng PROXY=$( lxc network show lxdbr0 | sed -n 's/\s\+ipv4.address: \([... path: / type: disk tun: path: /dev/net/tun type: unix-char </code> create container... Proxy "http://10.106.191.1:3142"; </file> ===== network ===== <code> lxc network create br0 lxc netw
- galileo @tips:vpn
- alileo.org * username e password <code> yay -S networkmanager-l2tp networkmanager-strongswan </code> aggiungere vpn L2TP {{ :tips:vpn:vpn01.png?400 |}}... 00 |}} ====== pptp manual ====== <file ini /etc/NetworkManager/system-connections/galileo.nmconnectio... r-auth-type=password service-type=org.freedesktop.NetworkManager.l2tp [vpn-secrets] password=xxx [ipv
- docker @projects:zibaldone:linux
- o <code> docker run --name vpn-leonardo --cap-add=NET_ADMIN --device=/dev/net/tun -dit sslvpn-plus-leonardo bash </code> ===== clone source ===== <code> ... ker buildx create --use --name $NAME --driver-opt network=host </code> build from a Dockerfile and pus... ult-addr-pool-mask-length 26 </code> convert web network scoped "local" to swarm scope <code> docker n
- univr @tips:vpn
- ===== ubuntu ====== <code bash> sudo apt install network-manager-vpnc network-manager-vpnc-gnome </code> ====== arch ====== <code> paru networkmanager-vpnc </code> ====== network manager ====== <code> yay -S networkmanager-vpnc </code> ad
- airos @tips
- 2", "devmodel": "Rocket Prism 5AC Gen2", "netrole": "bridge", "loadavg": 0.129883, "tot... false, "wireless": { "essid": "lessinianet.net", "mode": "sta-ptmp", "compat_11n": 0, ... 961984, "freeram": 81661952, "netrole": "bridge", "mode": "ap-ptmp", ... "cpe-240187", "devmodel": "PowerBeam M5 300", "netrole": "router", "totalram": 63623168, "freeram"
- syntax @wiki
- s|images]] (see below) like this: [[http://php.net|{{wiki:dokuwiki-128.png}}]] [[http://php.net|{{wiki:dokuwiki-128.png}}]] Please note: The image form... ed external image: {{https://secure.php.net/images/php.gif?200x50}} Real size: ... ed external image: {{https://secure.php.net/images/php.gif?200x50}} By using left or right
- scipiodev @projects:livenet
- sharenfs=ro rpool/livenet/backups </code> ====== network ====== <code> virsh net-edit default </code> <code> <ip address='192.168.122.1' netmask='255.255.255.0'> <tftp root='/livenet/boo... nux.0' /> </dhcp> </ip> </code> <code> virsh net-destroy default virsh net-start default </code>
- postgres @tips:db
- o apt install postgresql </code> eventually open network for remote connections <file ini /etc/postgre... set static IP on containers <code> /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts ├── pgmodeler └── postgres </code> <code> cat > /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts/pgmodeler <<EOF 00:16:3... d2,10.8.120.205,pgmodeler EOF cat > /var/lib/lxd/networks/lxdbr0/dnsmasq.hosts/postgres <<EOF 00:16:3e
- micropython @projects:internetofthings
- ll picocom picocom /dev/ttyUSB0 -b115200 </code> network wifi STA <code> import network sta_if = network.WLAN(network.STA_IF) sta_if.active(True) sta_if.connect('<your ESSID>', '<your password>') sta_if.
- virtualization @projects:livenet
- on ====== ===== Virtualbox ===== * Use virtio network driver * Use SATA driver for storage (no virtio available) * Use host only network and assign static IP to guest * In "User In... stip>:631/printers/<printername> </code> Enable network for guest if host is connected to work with eth0 <code> echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o
- zfs-on-root @tips:ubuntu
- -hwe-16.04 xserver-xorg-hwe-16.04 </code> enable network manager on all interfaces (see [[https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1638842|this]] <code> touch /etc/NetworkManager/conf.d/10-globally-managed-devices.con
- blender @tips
- d0do4|vevor]] [[https://d37keo26p536wj.cloudfront.net/mdm-goods-service-prod/CNCENGRAVINGMACHINE%E2%80%... that there is no connection of the CNC ground to net ground, so the entire frame/circuit is "floating"... ** board AND a **connection from the frame to the nets** ground and all problems desapeared. So instead
