Fulltext results:
- server @projects:livenet
- g** <code>apt install isc-dhcp-server </code> **network config ** nano /etc/netplan/01-netcfg.yaml <code> # This file describes the network interfaces available on your system # For more info
- 11-ns-network @projects:openstack-ansible
- AT (senza floating IP) passa ancora attraverso il network node centralizzato. Questa è una lista di se... on L3 Agent (Compute Nodes) * Neutron L3 Agent (Network Node/Controller) * Neutron Metadata Agent ... il traffico senza Floating IP è centralizzato sul network node * Metering Agent: Il servizio di meter... rare e misurare l'utilizzo della banda per tenant/network ==== Controller Node ==== Il controller node
- docker @projects:zibaldone:linux
- o <code> docker run --name vpn-leonardo --cap-add=NET_ADMIN --device=/dev/net/tun -dit sslvpn-plus-leonardo bash </code> ===== clone source ===== <code> ... ker buildx create --use --name $NAME --driver-opt network=host </code> build from a Dockerfile and pus... ult-addr-pool-mask-length 26 </code> convert web network scoped "local" to swarm scope <code> docker n
- scipiodev @projects:livenet
- sharenfs=ro rpool/livenet/backups </code> ====== network ====== <code> virsh net-edit default </code> <code> <ip address='192.168.122.1' netmask='255.255.255.0'> <tftp root='/livenet/boo... nux.0' /> </dhcp> </ip> </code> <code> virsh net-destroy default virsh net-start default </code>
- micropython @projects:internetofthings
- ll picocom picocom /dev/ttyUSB0 -b115200 </code> network wifi STA <code> import network sta_if = network.WLAN(network.STA_IF) sta_if.active(True) sta_if.connect('<your ESSID>', '<your password>') sta_if.
- virtualization @projects:livenet
- on ====== ===== Virtualbox ===== * Use virtio network driver * Use SATA driver for storage (no virtio available) * Use host only network and assign static IP to guest * In "User In... stip>:631/printers/<printername> </code> Enable network for guest if host is connected to work with eth0 <code> echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o
- iotaiuto @projects:internetofthings
- ervice [Unit] Description=Home Assistant After=network.target [Service] Type=simple User=pi ExecSt... arnings, which are a common false # alarm on WiFi networks. This option preserves the security of # ... rov. # 1.5 Run setup() and provide your ssid, network password (if secured), and set the security m
- 00-setup-univr @projects:openstack-ansible
- anagement | OS-MGT | 1109 | Ansible network | 10.224.3.0/24 | | api... | OS-INTERNAL | 1112 | Management Network | 10.224.10.0/24 | | tunnel... | OS-ADMIN | 1113 | Tunnel (VXLAN network) | 10.224.12.0/24 | | ceph-stor
- 04-connessione-ceph @projects:openstack-ansible
- ph_client_uuid }}" nova_libvirt_disk_cachemodes: "network=writeback" nova_libvirt_hw_disk_discard: unma... cephx auth_client_required: cephx public_network: "10.224.14.0/24" cluster_network: "10.224.16.0/24" # Funzionalità RBD ottimizzate per
- tradfri @projects:internetofthings
- o disponibili qui:\\ http://fw.ota.homesmart.ikea.net/feed/version_info.json\\ Questo dovrebbe essere ... ricare i firmware:\\ http://fw.ota.homesmart.ikea.net/Tradfri_OTA_release_signed_2019_01_28_155911/bin/
- seamless @projects:livenet
- * Activate remote connections * Install dot net runtime * Install [[http://www.kimknight.net/remoteapptool|remoteapptool]] * Activate allowlist fo
- turbolevo @projects:zibaldone:electronic
- ype can bitrate 250000 </code> or <file txt /etc/network/interfaces> auto can0 iface can0 inet manua... de> filtrare i messaggi con id 300 (il 777 è una netmask) <code> candump can0,300:777 </code> record
- 3dprinter
- B0 stm32flash 0.5 http://stm32flash.sourceforge.net/ Interface serial_posix: 57600 8E1 Version
- mdm
- er socket: mqtt://94.230.76.87:31000 due to: java.net.BindException: Cannot assign requested address (B
- esp32lora @projects:internetofthings
- pg?400|}} heltec esp32 lora https://escapequotes.net/esp32-lora-send-receive-packet-test/ {{ :projects
