Home Assistant

Book Creator
Add this page to your book

Book Creator
Remove this page from your book

example 1
pip3 install urllib3==1.20 –upgrade –target ~/.homeassistant/deps/ (telegram notify solved)

pip install -U homeassistant

and after restart home assistant

https://github.com/home-assistant/fabric-home-assistant

sudo apt install python3 python3-venv incron mc python3-dev libffi-dev libssl-dev
python3 -m venv ~/venv
. ~/venv/bin/activate
echo "source ~/venv/bin/activate" >> ~/.bashrc
pip install -U pip wheel
pip install homeassistant

service

/etc/systemd/system/hass.service

[Unit]
Description=homeassistant
After=network.target
 
[Service]
Type=simple
User=pi
ExecStart=/home/pi/venv/bin/hass -c "/home/pi"
 
[Install]
WantedBy=multi-user.target

enable service

systemctl daemon-reload
systemctl enable hass

configuration example

sudo apt install git mc
git clone https://github.com/scipioni/home-assistant-example.git home-assistant-scipio

Installazione ZWave su raspberry pi

opzionale, rimuovere docker se si hanno installazioni vecchie:
sudo apt-get purge -y docker-engine docker docker.io docker-ce docker-ce-cli
sudo apt-get autoremove -y --purge docker-engine docker docker.io docker-ce  


sudo apt update
sudo apt install raspberrypi-kernel raspberrypi-kernel-headers
sudo apt install ca-certificates curl gnupg lsb-release

sudo mkdir -p /etc/apt/keyrings

curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg

echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin
(se ci sono errori dpkg, riprovare dopo un reboot)

sudo systemctl enable docker
sudo systemctl start docker

ls /dev/serial/by-id/
copiare il nome della chiavetta usb (es usb-0658_0200-if00)

mkdir zwave
cd zwave
wget https://raw.githubusercontent.com/zwave-js/zwavejs2mqtt/master/docker/docker-compose.yml
nano docker-compose.yml
incollare il nome della chiavetta al posto di "insert_stick_reference_here"
salvare

sudo docker compose up -d

Visitare http://ip-raspberry:8091

Andare sulle settings dal menu laterale

Sezione Zwave

serial port: lasciare /dev/zwave (la mappatura viene fatta dal docker compose)

generare tutte e 4 le chiavi, S2 e S0, premendo sui pulsanti con le frecce circolari

Sezione general

enable log

scorrere in basso

abilitare “disable MQTT gateway”

Sezione Home Assistant

Abilitare WS server

Salvare

Dall'interfaccia di home assistant installare l'integrazione ZwaveJS

Inserire come url:

ws://localhost:3000

Ora homeassistant è pronto per cercare nuovi dispositivi zwave, dalla schermata di configurazione dell'integrazione ZwaveJS

TKB Home TZ10.XX / TZ10.36 termostato <Product type="0201" id="0501" name="TZ10.XX Wall Thermostat" config="wenzhou/tz10.xml"/>

/etc/udev/rules.d/local.conf

SUBSYSTEM=="tty", ACTION=="add", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="zwave"

Add to ~/lib/lib/python3.5/site-packages/python_openzwave/ozw_config/manufacturer_specific.xml near <Manufacturer id=“0118” name=“Wenzhou TKB Control System”>

<Product type="0201" id="0501" name="TZ10.XX Wall Thermostat" config="wenzhou/tz10.xml"/>

wenzhou/tz10.xml

<?xml version="1.0" encoding="utf-8"?>
<Product xmlns='http://code.google.com/p/open-zwave/'>
   <!-- COMMAND_CLASS_BASIC does not respond to requests -->
  <CommandClass id="32" action="remove" />
  <!-- This thermostat's setpoint descriptions are 0 based -->
  <CommandClass id="66">
                <Value type="string" genre="user" instance="1" index="0" label="Operating State" units=" mode" value="Idle" />
  </CommandClass>
  <CommandClass id="67" base="0" override_precision="2" />
</Product>

/etc/nginx/sites-enabled/homeassistant

server {
    listen 80;
    server_name  "scipio.csgalileo.org";
 
    # create this folder empty
    location /.well-known/acme-challenge {
        root /var/www;
        allow all;
    }
 
    location / {
        return 301 https://$server_name$request_uri;
    }
}
 
server {
  listen 443 ssl;
  server_name  "scipio.csgalileo.org";
  ssl on;
 
  proxy_buffering off;
  location / {
    proxy_pass http://localhost:8123/;
    proxy_set_header Host $host;
  }
 
  ssl_certificate /etc/ssl/certs/scipio.csgalileo.org.cer;
  ssl_certificate_key /etc/ssl/private/scipio.csgalileo.org.key;
}

apt install mosquitto

mosquitto_passwd /etc/mosquitto/pwfile scipio

mosquitto_passwd /etc/mosquitto/pwfile simo

~/.homeassistant/known_devices.yaml

setup

git config --global push.default simple
git clone https://github.com/scipioni/home-assistant.git
cd home-assistant
git remote add upstream https://github.com/home-assistant/home-assistant.git
git fetch -v
 
# script/setup

create a branch with expected work

git branch telegram-webhooks
git checkout telegram-webhooks
git push --set-upstream origin telegram-webhooks

everyday work on branch

...
git add 
git commit
git push

rebase before pull request

git fetch upstream dev
git rebase upstream/dev
 
# in case of conflicts
... edit conflicts
git add ...
git rebase --continue
 
# -f is necessary (Git will reject it because there isn't a direct path from the commit on the server to the commit on your branch)
git push -f

now in github project “new pull request”

git clone https://github.com/scipioni/home-assistant.git
cd home-assistant.github.io.git
git remote add upstream https://github.com/home-assistant/home-assistant.github.io.git
git fetch -v
 
# script/setup

create a branch with expected work

git branch telegram-webhooks
git checkout telegram-webhooks
git push --set-upstream origin telegram-webhooks

ruby

sudo apt install y ruby ruby-dev
sudo gem install bundler
cd home-assistant.github.io.git
bundle
rake generate

test site

rake preview

everyday work on branch

...
git add 
git commit
git push

rebase before pull request

git fetch upstream next
git rebase upstream/next
 
# in case of conflicts
... edit conflicts
git add ...
git rebase --continue
 
# -f is necessary (Git will reject it because there isn't a direct path from the commit on the server to the commit on your branch)
git push -f

now in github project “new pull request”

Install latest release from https://github.com/Motion-Project/motion

/etc/motion/motion.conf

on_picture_save /usr/bin/motion-homeassistant %f

/usr/bin/motion-homeassistant

#!/bin/sh
 
F=$1
ln -sf $(basename $F) $(dirname $F)/lastsnap.jpg

config.yaml

camera:
  - platform: local_file
    name: soggiorno
    file_path: /media/usb0/photo/lastsnap.jpg

/dev-service → zwave → set_config_parameter

disable LED on fibardo FGMS-001

{
"node_id": 3,
"parameter": 80,
"value": 0
}

Foscam IP camera

vlc rtsp://hass:password1@192.168.2.14:554/videoMain

create a virtual switch

input_boolean.yaml

motion_detected:
  name: Motion rilevato
  initial: off
  icon: mdi:run

we can turn on this virtual switch with as web service

curl -X POST -H "x-ha-access: xxx" -H "Content-Type: application/json" -d '{"state": "on"}' \
 http://localhost:8123/api/states/input_boolean.motion_detected

automation that reset virtual switch after 2 seconds

automation/on-motion.yaml

alias: 'reset motion state'
trigger:
  platform: state
  entity_id: input_boolean.motion_detected
  to: 'on'
action:
  # after two seconds reset motion_detected state
  - delay: '00:00:02'
  - service: input_boolean.turn_off
    data:
      entity_id: input_boolean.motion_detected

https://github.com/hokus15/home-assistant-config

sudo apt install incron

echo hass > /etc/incron.allow

as hass user edit incron table 'incrontab -e' (incrontab -l to see)

/media/usb0/photo/C1_00626E611E80/snap/ IN_CLOSE_WRITE echo "$$ $@ $# $% $&"

Add influxdb datasource

https://home-assistant.it/integrare-alexa-in-home-assistant-senza-usare-il-cloud-e-a-costo-zero/

Modificare https://github.com/mike-grant/haaska per il multiclient.

haaska.py gira come servizio sui lambda server amazon. Anziché leggere la configurazione (ad esempio bearer_token) da file, prevedere una chiamata ad un web service esterno (ad esempio https://ha.csagalileo.org/alexa?client=id_client_alexa) da cui recuprare i dati. Ovviamente va mappato id_client_alexa con albertis

Sniffare i metodi:

def get(self, endpoint):
def post(self, endpoint, data, wait=False):

Home Assistant

Install

upgrade

with fabric

hass

z-wave

configurazioni z-wave vecchie

reverse proxy

MQTT

zones

github

github docs

motion

sensors

automation

camera motion

grafana

alexa

Galileo Labs