Home Assistant

• home assistant
• raspberry
• https://github.com/scipioni/home-assistant-example

• example 1
• pip3 install urllib3==1.20 –upgrade –target ~/.homeassistant/deps/ (telegram notify solved)

pip install -U homeassistant

and after restart home assistant

• https://github.com/home-assistant/fabric-home-assistant

apt install python3 python3-venv incron mc python3-dev
python3 -m venv ~/lib
. ~/lib/bin/activate
echo "source ~/lib/bin/activate" >> ~/.bashrc
pip install -U pip
pip install homeassistant

service

/etc/systemd/system/home-assistant.service

[Unit]
Description=Home Assistant
After=network.target
 
[Service]
Type=simple
User=pi
ExecStart=/home/pi/lib/bin/hass -c "/home/pi"
 
[Install]
WantedBy=multi-user.target

enable service

systemctl daemon-reload
systemctl enable home-assistant

configuration example

sudo apt install git mc
git clone https://github.com/scipioni/home-assistant-example.git home-assistant-scipio

TKB Home TZ10.XX / TZ10.36 termostato <Product type="0201" id="0501" name="TZ10.XX Wall Thermostat" config="wenzhou/tz10.xml"/>

/etc/udev/rules.d/local.conf

SUBSYSTEM=="tty", ACTION=="add", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="zwave"

Add to ~/lib/lib/python3.5/site-packages/python_openzwave/ozw_config/manufacturer_specific.xml near <Manufacturer id=“0118” name=“Wenzhou TKB Control System”>

<Product type="0201" id="0501" name="TZ10.XX Wall Thermostat" config="wenzhou/tz10.xml"/>

wenzhou/tz10.xml

<?xml version="1.0" encoding="utf-8"?>
<Product xmlns='http://code.google.com/p/open-zwave/'>
   <!-- COMMAND_CLASS_BASIC does not respond to requests -->
  <CommandClass id="32" action="remove" />
  <!-- This thermostat's setpoint descriptions are 0 based -->
  <CommandClass id="66">
                <Value type="string" genre="user" instance="1" index="0" label="Operating State" units=" mode" value="Idle" />
  </CommandClass>
  <CommandClass id="67" base="0" override_precision="2" />
</Product>

/etc/nginx/sites-enabled/homeassistant

server {
    listen 80;
    server_name  "scipio.csgalileo.org";
 
    # create this folder empty
    location /.well-known/acme-challenge {
        root /var/www;
        allow all;
    }
 
    location / {
        return 301 https://$server_name$request_uri;
    }
}
 
server {
  listen 443 ssl;
  server_name  "scipio.csgalileo.org";
  ssl on;
 
  proxy_buffering off;
  location / {
    proxy_pass http://localhost:8123/;
    proxy_set_header Host $host;
  }
 
  ssl_certificate /etc/ssl/certs/scipio.csgalileo.org.cer;
  ssl_certificate_key /etc/ssl/private/scipio.csgalileo.org.key;
}

apt install mosquitto

mosquitto_passwd /etc/mosquitto/pwfile scipio

mosquitto_passwd /etc/mosquitto/pwfile simo

~/.homeassistant/known_devices.yaml

setup

git config --global push.default simple
git clone https://github.com/scipioni/home-assistant.git
cd home-assistant
git remote add upstream https://github.com/home-assistant/home-assistant.git
git fetch -v
 
# script/setup

create a branch with expected work

git branch telegram-webhooks
git checkout telegram-webhooks
git push --set-upstream origin telegram-webhooks

everyday work on branch

...
git add 
git commit
git push

rebase before pull request

git fetch upstream dev
git rebase upstream/dev
 
# in case of conflicts
... edit conflicts
git add ...
git rebase --continue
 
# -f is necessary (Git will reject it because there isn't a direct path from the commit on the server to the commit on your branch)
git push -f 

now in github project “new pull request”

git clone https://github.com/scipioni/home-assistant.git
cd home-assistant.github.io.git
git remote add upstream https://github.com/home-assistant/home-assistant.github.io.git
git fetch -v
 
# script/setup

create a branch with expected work

git branch telegram-webhooks
git checkout telegram-webhooks
git push --set-upstream origin telegram-webhooks

ruby

sudo apt install y ruby ruby-dev
sudo gem install bundler
cd home-assistant.github.io.git
bundle
rake generate

test site

rake preview

everyday work on branch

...
git add 
git commit
git push

rebase before pull request

git fetch upstream next
git rebase upstream/next
 
# in case of conflicts
... edit conflicts
git add ...
git rebase --continue
 
# -f is necessary (Git will reject it because there isn't a direct path from the commit on the server to the commit on your branch)
git push -f 

now in github project “new pull request”

Install latest release from https://github.com/Motion-Project/motion

/etc/motion/motion.conf

on_picture_save /usr/bin/motion-homeassistant %f

/usr/bin/motion-homeassistant

#!/bin/sh
 
F=$1
ln -sf $(basename $F) $(dirname $F)/lastsnap.jpg

config.yaml

camera:
  - platform: local_file
    name: soggiorno
    file_path: /media/usb0/photo/lastsnap.jpg

• /dev-service → zwave → set_config_parameter

disable LED on fibardo FGMS-001

{
"node_id": 3,
"parameter": 80,
"value": 0
}

Foscam IP camera

vlc rtsp://hass:password1@192.168.2.14:554/videoMain

create a virtual switch

input_boolean.yaml

motion_detected:
  name: Motion rilevato
  initial: off
  icon: mdi:run

we can turn on this virtual switch with as web service

curl -X POST -H "x-ha-access: xxx" -H "Content-Type: application/json" -d '{"state": "on"}' \
 http://localhost:8123/api/states/input_boolean.motion_detected

automation that reset virtual switch after 2 seconds

automation/on-motion.yaml

alias: 'reset motion state'
trigger:
  platform: state
  entity_id: input_boolean.motion_detected
  to: 'on'
action:
  # after two seconds reset motion_detected state
  - delay: '00:00:02'
  - service: input_boolean.turn_off
    data:
      entity_id: input_boolean.motion_detected

• https://github.com/hokus15/home-assistant-config

sudo apt install incron

echo hass > /etc/incron.allow

as hass user edit incron table 'incrontab -e' (incrontab -l to see)

/media/usb0/photo/C1_00626E611E80/snap/ IN_CLOSE_WRITE echo "$$ $@ $# $% $&"

Add influxdb datasource